Hytrol Catalog

CATALOG | 08312018 Transnorm Junction Conveyor TS4200-150 The Transnorm TS4200/150 is a belt conveyor with an angled terminal at one end allowing product to feed onto or discharge from a main line at 30° or 45°. • 3 Belt Widths • Adjustable TS Inc Type Floor Supports Available • Endless Belting F.O.B. Arlington, Texas • OPTIONAL EQUIPMENT DRIVE LOCATION –On drive pulley for merging and on end roller for diverting. MOTORS –other HP’s available, 7.5 HP maximum (contact factory) CEILING HANGERS –Includes mounting brackets and cross pipes only. GUARD RAILS –3 in. to 24 in. tall available for all sizes. ELECTRICAL CONTROLS –AC variable frequency drives available CUSTOM COLORS –Available (contact factory). Paint chip must be provided. • STANDARD SPECIFICATIONS BELT - Gray, High Friction Novo 25, endless FRAME - 8”deep aluminum extrusion frame PULLEYS- 1-1/16 in. dia. nosebar BEARINGS- Sealed, pre-lubricated, self-aligning, ball bearings on the drive pulley. Re-lube type. MOTOR- 2 HP Shaft Mounted Right Angle Gearmotor 208/230/460/575V-3Ph. 60 Hz (Specify Exact Voltage). BELT SPEED- Constant 600 FPM Max at Centerline of Conveying Surface. CAPACITY- Maximum load per linear foot (measured at centerline of conveying surface) 40 lbs. FLOOR SUPPORTS- Standard rectangular tubing style for up to 39”T.O.B. Other heights available (Contact Factory) BF CLL TOB SG Height BF CLL TOB SG Height 30° Junction Conveyor 45° Junction Conveyor For warranty/spare parts contact Transnorm System’s customer service. Please provide Transnorm’s serial number. Transnorm System Inc. 2810 Avenue E East Arlington, TX 76011 Phone: 1-800-331-1749 X 249 Fax: (972) 606-0768

RkJQdWJsaXNoZXIy NjQ0OTEy