Hytrol Catalog

CATALOG | 08312018 Conveyor shown with optional floor supports TR Horizontal Belt Conveyor (Troughed Bed) • 10 Belt Widths • Reversible (with center drive) • Troughed Bed • Adjustable MS-Type Floor Supports Available The Model TR, with built-in guard rails, is ideal for overhead conveying applications. It easily conveys boxes, cartons, cases, bags, etc., as well as loose parts. 2-1/8" DIA. SNUB IDLER 4" DIA. DRIVE PULLEY 6" 5-1/2" NIP POINT GUARD 15-5/8" 2" 22" OPTIONAL MS SUPPORT SHOWN 35-1/4" ALLOW 16" 11-1/16" 13-1/4" MAX. 2-1/8" DIA. SNUB IDLER 2" TAKE-UP 6" NIP POINT GUARD 4" DIA. TAIL PULLEY "X" "X" OVERALL LENGTH "A" BED LENGTH "L" 1.9" DIA. RETURN IDLER FLOW 4” END DRIVE OVERALL LENGTH "A" BED LENGTH "L" ALLOW 16" OPTIONAL MS SUPPORT SHOWN 13-1/4" MAX. 39-1/4" MAX. 26" 16-1/2" MAX. 9-1/2" 5-1/4" 8" DIA. DRIVE PULLEY 2-1/8" DIA. SNUB IDLER 11-15/16" MAX. 10" FLOW 4-3/8" OVERALL BED WIDTH BED WIDTH BELT WIDTH 1/2" 2-1/2" 4" 2-1/8" DIA. SNUB IDLER TOTALLY ENCLOSED CHAIN GUARD R.H. SIDE L.H. SIDE SECTION “X-X” 8” END DRIVE SIZE TO ORDER Overall Length "A" Bed Length "L" Overall Length with Center Drive Drive Pulley Black Friction Surface Belt Widths 6" 8" 10" 12" 14" 16" 18" 20" 24" 30" Between Side Guards 7" 9" 11" 13" 15" 17" 19" 21" 25" 31" Overall BedWidths 8" 10" 12" 14" 16" 18" 20" 22" 26" 32" 6’ 5’ 6' 4" Dia. 254 267 277 287 297 320 330 358 381 404 11’ 10’ 11' 301 316 330 344 358 398 412 427 452 477 16’ 15’ 16' 369 388 407 425 443 501 520 539 573 607 21’ 20’ 21' 422 445 468 490 512 535 558 581 627 696 26’ 25’ 26' 491 519 546 573 599 627 655 683 739 823 31’ 30’ 31' 538 570 601 632 662 694 726 758 822 918 36’ 35’ 36' 535 621 656 694 737 773 810 846 919 1029 41’ 40’ 41' 655 695 735 759 813 853 894 935 1017 1140 46’ 45’ 46' 702 747 760 836 892 932 978 1023 1114 1249 51’ 50’ 51' 775 825 874 923 971 1022 1072 1122 1222 1372 56'-4" 55' 56' 8" Dia. 822 876 929 985 1046 1101 1156 1210 1319 1481 61'-4" 60' 61' 892 950 1008 1065 1122 1181 1240 1299 1417 1594 66'-4" 65' 66' 939 1001 1063 1127 1197 1260 1324 1387 1514 1703 71'-4" 70' 71' 1013 1081 1148 1215 1281 1351 1419 1487 1623 1827 76'-4" 75' 76' 1060 1132 1203 1277 1356 1430 1503 1575 1720 1936 81'-4" 80' 81' 1130 1206 1282 1357 1432 1521 1587 1664 1818 2049 86'-4" 85' 86' 1146 1257 1337 1419 1507 1589 1671 1752 1915 2158 91'-4" 90' 91' 1177 1331 1415 1499 1582 1669 1754 1839 2039 2324 96'-4" 95' 96' 1293 1382 1470 1561 1657 1748 1838 1927 2136 2433 101'-4" 100' 101' 1363 1456 1549 1641 1733 1828 1922 2016 2204 2486 All weights in catalog are CONVEYORWEIGHTS ONLY. Accessories, crating, etc., are not included. NOTE : 16”, 18”& 22”BedWidth (Up to 51’Length) - 1Week Stockyard CATALOG | 08312018 TR BELT –Ultimate 140 BBS–Nitrile. BED –4 in. deep x 12 ga. formed steel slider bed with 2 1/2 in. deep guards, powder painted. Standard 5 ft. & 10 ft. long sections bolt together with splice plates. END DRIVE –Located on discharge end of conveyor, chain guard on left hand side. DRIVE PULLEY –4 in. dia. with 1 in. dia. shaft at bearings or 8 in. dia. with 1 3/16 in. dia. shaft at bearings, machine crowned and fully lagged. See chart. TAIL PULLEY –4 in. dia. with 1 in. dia. shaft at bearings, machine crowned. SNUB IDLER –Adjustable 2 1/8 in. dia. pre-lubricated ball bearings. Guards included. RETURN IDLER –Adjustable 1.9 in. dia. pre-lubricated ball bearings. TAKE-UP –Take-ups at tail pulley. Provides 4 in. of belt take-up. BEARINGS –Sealed, pre-lubricated ball bearings, self-aligning, ball bearings on drive and tail pulleys. SPEED REDUCTION –Sealed worm gear C-Face speed reducer. No. 50 roller chain to drive pulley. MOTOR –1/2 HP–208/230/460/575V–3 Ph.–60 Hz. Totally Enclosed C-Face. BELT SPEED –Constant 65 FPM. CAPACITY –Maximum load per linear foot of conveyor 75 lbs. NOT TO EXCEED capacity in charts. FLOOR SUPPORTS –Now supplied as optional equipment. • OPTIONAL EQUIPMENT FLOOR SUPPORTS –MS Type floor supports are available with a wide range of adjustment. Specify top of belt or roller elevation. One support required at every bed joint and ends of conveyor. Holes in feet for lagging to floor. Knee braces recommended above MS-6 support. BELT* –White Polymate 100 RMP-COS (cover one side), Black Trackmate 120 Roughtop with PVC cover, Brown Polymate Roughtop w/Nitrile cover, BlackTrackmate 533 COS-PVC,Tan Glidetop, Brown Nitrile Roughtop. BELT SPEED* –Other constant and variable speeds. V-belt drive supplied under 17 FPM. HIGHER SIDES –4 in., 6 in., 9 in., and 12 in. high vertical sides (12 in. Maximum). OVERHEAD END DRIVE –Motor reducer unit mounted 9 1/2 in. above belt. Other clearances available, specify. Chain guard RH side. Minimum elevation 6 in. with 4 in. drive, 10 in. with 8 in. drive. SIDE MOUNTED END DRIVE –Motor reducer unit mounted to LH side of conveyor. Minimum elevation 7 in. with 4 in. drive, 10 in. with 8 in. drive. CENTER DRIVE –Provides 16 in. of belt take-up. Minimum elevation 16 in. with 4 in. drive, 17 in. with 8 in. drive. Specify location. Minimum OAL without modification-63 in. with 4 in. drive, 66 in. with 8 in. drive. LOWELEVATION SIDEMOUNTED CENTER DRIVE –Motor-reducer unit mounted to side of conveyor. Minimum elevation 13 1/2 in. with 4 in. or 8 in. drive. STACKED END DRIVE –Minimum elevation 27 3/4”with V-belt drive, 33 3/4”with C-Face drive. SHAFT MOUNTED END DRIVE –Contact Factory V-BELT DRIVE –V-Belt supplied between motor and reducer. Minimum overall drive width 14 in. Allow 65 in. O-RING DRIVE CHAIN –With sealed in lubricant (Recommended for applications that do not permit regular lubrication). UNDERSIDE TAKE-UP –Provides 16 in. of belt take-up. Extends down 13 1/4 in. from top of belt. NOSEOVER* –Adjustable, single (0 ° to 15 ° ), double (0 ° to 30 ° ). LOWERPOWEREDFEEDER* –Chaintypedrivenfromtailpulleyof inclinedconveyor.Undersidetake- up required when end drive is used. MS-Type floor supports now supplied as optional equipment. 8 in. dia. drive recommended on conveyor when feeder exceeds 44 1/2 in.OAL. GRAVITY BRACKETS –Adjustable bars with 1 in. dia. pop-out transfer roller to attach wheel or 1 3/8 in. roller conveyor. Available 11 in. to 25 in. bed widths only. BUTT COUPLINGS –Provides connection to SB, RB, LR, ACC, ACZ, ABEZ, 190-NSP, 190-NSPEZ, 1.9 in. & 2.0 in. gravity conveyors. Includes 1 in. dia. pop-out roller. Center drive or underside take-up recommended. PULLEYS –6 in. tail with 1 3/16 in. dia. shaft at bearings or 8 in. drive with 1 3/16 in. dia. shaft at bearings. CASTERS –See Accessory section. POLY-TIER SUPPORTS –36 in. to 120 in. support heights in 6 in. increments. Knee braces supplied. CEILING HANGERS –5/8 in. dia. x 8 ft. long unplated rods fully threaded. Other lengths and galvanized rods available. MOTORS –Energy efficient, single phase, brakemotor, other characteristics. 2 HP maximum. ELECTRICAL CONTROLS –One direction manual start switch, reverse drum switch, non-reversing and reversible magnetic starters, push button stations. AC variable frequency drive. *NOTE : Capacity affected with these options. LOAD CAPACITY CHART @ 65 FPMW/STANDARD BELT LENGTHS UP TO HP BELT WIDTHS TO 4" Dia. Drive Pulley 8" Dia. Drive Pulley 11' 21' 31' 41' 51' 77' 102' DISTRIBUTED LOAD (LBS.) 1/2 16" 335 320 310 300 285 260 230 24" 320 300 285 270 255 210 170 30" 300 275 255 235 215 165 115 1 16" 650 635 625 615 605 625 595 24" 635 620 600 585 570 580 540 30" 620 595 575 550 530 535 480 LOAD CAPACITY CHART 25° INCLINED @ 65 FPMW/ROUGH TOP BELT HP BELT WIDTHS TO LENGTHS UP TO 11' 21' 31' 41' 51' DISTRIBUTED LOAD (LBS.) 1/2 16" 155 145 135 125 110 24" 145 130 115 100 80 30" 135 115 95 75 55 1 16" 310 300 290 280 270 24" 305 285 270 255 240 30" 290 270 250 230 210 • STANDARD SPECIFICATIONS

RkJQdWJsaXNoZXIy NjQ0OTEy