Hytrol Catalog

CATALOG | 08312018 SL Heavy Duty Horizontal Slat Conveyor The Model SL Steel Belt Slat conveyor provides lasting, dependable performance. Can be used to convey hot, oily parts or items through heat drying processes. Can also be used for assembly line and production operations. • 5 BedWidths • Energy Efficient Motor with AC Variable Speed Controller • Rugged–all Steel Construction • Modular Construction • Roller Chain Reduces Friction • Adjustable SLS-Type Floor Supports Available "Y" "Y" 25" MINIMUM ELEVATION 1-1/4" DRIVE SPROCKET SLAT RETURN 48" OVERALL LENGTH "A" BED LENGTH "L" "X" "X" ACCESS PANEL OPTIONAL SLS SUPPORT SHOWN TAIL SPROCKET TAKE-UP 60" SECTION X-X OVERALL BED WIDTH SLAT WIDTH 2-1/2" 1/4" 1-1/2" 2-1/4" BUTT COUPLING STEEL SLAT 2" DIA. ROLLER CHAIN RETURN BED SPACER 17" SIZE TO ORDER Overall Length "A" Bed Length "L" Slat Width 28" 31" 37" 43" 49" Overall BedWidth 33" 36" 42" 48" 54" 9' – WEIGHTS (Lbs.) 1692 1773 1936 2099 2262 14' 5' 2184 2291 2506 2721 2936 19' 10' 2677 2809 3076 3343 3610 24' 15' 3169 3327 3646 3965 4284 29' 20' 3662 3845 4216 4587 4958 39' 30' 4647 4881 5357 5831 6306 49' 40' 5632 5917 6497 7075 7654 59' 50' 6617 6954 7638 8319 9003 69' 60' 7602 7990 8778 9563 10351 79' 70' 8587 9026 9918 10807 11669 All weights in catalog are conveyor weights only. Accessories, crating, etc., are not included. OVERALL BED WIDTH 15-7/8" CHAIN GUARD GEAR REDUCER STEEL SLAT 1-1/4" 3-7/16" SECTION Y-Y CATALOG | 08312018 SL END DRIVE –Located at discharge end of conveyor. Chain guard located on left hand side. SLATS –Formed steel slat, 5 3/4 in. x 1 1/2 in. x 7 ga. channel. CHAIN –6 in. pitch bushed roller steel chain with 2 in. dia. high capacity roller bearing. BED –17 in. deep x 10 ga. formed steel channel powder painted. Standard 5 ft. and 10 ft. long sections bolt together with butt couplings. DRIVE SPROCKETS –12 in. pitch dia. with 2 15/16 in. dia. shaft. TAKE-UP –Take-ups provided at tail sprockets. Provides 15 1/2 in. of chain take-up. BEARINGS –Sealed, pre-lubricated, self-aligning, ball bearings at drive and tail sprockets. SPEED REDUCTION –Heavy-duty sealed worm gear C-Face speed reducer. No. 100 roller chain to drive sprocket. MOTOR –2 HP–230/460V–3 Ph. 60 Hz. Energy Efficient C-Face and AC variable speed controller with soft start capability and motor overload protection. CONVEYING SPEED –Constant 30 FPM. CAPACITY –Maximum load per linear foot of conveyor 1400 lbs. NOT TO EXCEED capacity in chart. FLOOR SUPPORTS –Now supplied as optional equipment. • OPTIONAL EQUIPMENT FLOORSUPPORTS –SLSandSLSDTypefixedfloorsupportsareavailable.Specifytopofslatelevation. One support required at every bed joint and ends of conveyor. Holes in feet for lagging to floor. SLAT –Wood, contact factory. MECHANICAL SHEAR PIN HUBS - Required if MD65 Controller is not used. ELECTRONIC SHEAR PIN - Required if MD65 Controller is not used. CONVEYING SPEED –Other constant and variable speeds available. Note : Capacity affected with speed change. Contact Factory. MOTORS –3 HP maximum. ELECTRICAL CONTROLS –Push-button stations. • STANDARD SPECIFICATIONS Detail shows inside view of roller chain which carries steel slats. Chain rides on steel angle mounted to conveyor side of channel. LOAD CAPACITY CHART @ 30 FPM HP SLATWIDTH SLATWIDTH 28" to 37" 43" & 49" TOTAL LOAD (LBS.) TOTAL LOAD (LBS.) UP TO 24' UP TO 49' UP TO 79' UP TO 24' UP TO 49' UP TO 79' 2 2400 850 – 2000 – – 3 6000 4400 2900 5600 3600 1700

RkJQdWJsaXNoZXIy NjQ0OTEy