Hytrol Catalog

CATALOG | 08312018 CATALOG | 08312018 RB Horizontal Belt Conveyor (Roller Bed) The Model RB is designed to move heavier loads. Roller bed design reduces belt friction and provides greater capacity. Applications include: assembly, inspection and packing operations. • 15 Belt Widths • Reversible • Moves Heavier Loads • Center Drive • System Ends • Pop-Out Roller • Adjustable MS-Type Floor Supports Available 12" 2-1/8" DIA. SNUB IDLER TAKE-UP 6" DIA. TAKE-UP PULLEY 8" DIA. DRIVE PULLEY 1.9" DIA. POP OUT ROLLER 4" OR 6" DIA. TAIL PULLEY 1.9" DIA. RETURN IDLER OPTIONAL MS SUPPORT SHOWN 17-3/4" 21" 38-1/4" 10-3/4" 8" 62" 2-1/2" DIA. SNUB IDLER ALLOW 16" 12" BED LENGTH "L" OVERALL LENGTH "A" PREFERRED FLOW 1.9" DIA. TREAD ROLLER "X" "X" (ALLOW 65” WITH V-BELT DRIVE) 6-1/2" CHANNEL FRAME SPACER 1-1/2" TREAD ROLLER 3/8" 3-1/8" BELT WIDTH BETWEEN RAIL WIDTH OVERALL FRAME WIDTH 2-1/8" DIA. SNUB IDLER/ 1.9" RETURN IDLER TOTALLY ENCLOSED CHAIN GUARD SECTION “X-X” SIZE TO ORDER Overall Length “A” 4”Dia. Pulley Bed Length “L” Between Rail Width 13” 15” 17” 19” 21” 23” 25” SIZE TO ORDER Overall Length “A” 6”Dia. Pulley 27” 31” 33” 37" 39” 45" 51" 54" Belt Width 10” 12” 14” 16” 18” 20” 22” 24” 28” 30” 34" 36” 42" 48" 57" Overall Frame Width 16” 18” 20” 22” 24” 26” 28” 30” 34” 36” 40" 42” 48" 54" 60" 12' 10' Weights (Lbs.) 561 593 625 657 689 721 753 12' 791 865 940 1014 1088 1162 1237 1312 17' 15' 660 696 732 768 804 840 876 17' 919 1002 1085 1167 1250 1333 1415 1497 22' 20' 760 800 840 880 920 960 1000 22' 1047 1138 1230 1321 1412 1503 1594 1682 27' 25' 859 903 947 991 1035 1079 1123 27' 1175 1275 1375 1474 1574 1673 1773 1867 32' 30' 959 1007 1054 1102 1150 1198 1246 32' 1304 1412 1520 1627 1735 1844 1952 2052 37' 35' 1058 1110 1162 1214 1266 1317 1369 37' 1432 1548 1665 1781 1897 2014 2130 2237 42' 40' 1158 1213 1269 1325 1381 1437 1492 42' 1560 1685 1810 1934 2059 2184 2309 2422 47' 45' 1257 1317 1377 1436 1496 1556 1616 47' 1688 1821 1955 2088 2221 2355 2488 2607 52' 50' 1357 1420 1484 1548 1612 1675 1739 52' 1816 1958 2100 2241 2383 2525 2667 2792 57' 55' 1456 1524 1592 1659 1727 1794 1862 57' 1944 2094 2245 2395 2545 2695 2845 2977 62' 60' 1556 1627 1699 1771 1842 1914 1985 62' 2072 2231 2390 2548 2707 2865 3024 3162 67' 65' 1655 1731 1806 1882 1957 2033 2109 67' 2200 2367 2535 2702 2869 3036 3203 3347 72' 70' 1755 1834 1914 1993 2073 2152 2232 72' 2328 2504 2680 2855 3031 3206 3382 3532 77' 75' 1854 1938 2021 2105 2188 2272 2355 77' 2456 2640 2825 3009 3193 3376 3560 3717 82' 80' 1954 2041 2129 2216 2303 2391 2478 82' 2585 2777 2970 3162 3354 3547 3739 3902 87' 85' 2053 2145 2236 2327 2419 2510 2601 87' 2713 2914 3115 3315 3516 3717 3918 4087 92' 90' 2153 2248 2343 2439 2534 2629 2725 92' 2841 3050 3260 3469 3678 3887 4097 4272 97' 95' 2252 2352 2451 2550 2649 2749 2848 97' 2669 3187 3405 3622 3840 4058 4275 4457 102' 100' 2352 2455 2558 2662 2765 2868 2971 102' 3097 3323 3550 3776 4002 4228 4454 4642 All weights in catalog are CONVEYORWEIGHTS ONLY. Accessories, crating, etc., are not included. NOTE : 16”, 20”, 22”, 26”, 28”, 34”, 40”& 42”Overall FrameWidths - 1Week Stockyard Conveyor shown with optional floor supports BELT –Ultimate 140 BBS–Nitrile. BED –Roller bed with 1.9 in. dia. roller x 16 ga. galvanized tube spaced every 6 in. Mounted in 6 1/2 in. x 12 ga. powder painted formed steel channel frame bolted together with splice plates. CROSS BRACING –Rods with turnbuckles are fastened to underside of bed to provide proper alignment of bed rollers and insure tracking. (1) supplied in first 50' of bed section lengths and (1) per 50' of bed section length thereafter. Supplied in approximate center of lengths. CENTER DRIVE –Minimum elevation–17 3/4 in. Can be placed on any section of conveyor length. Minimum OAL without modification 120 in. Chain guard located on left hand side. DRIVE PULLEY –8 in. dia. with 1 7/16 in. dia. shaft at bearings, fully lagged. TAIL PULLEY –4 in. dia. with 1 in. dia. shaft at bearings or 6 in. dia. with 1 3/16 in. dia. shaft at bearings, machine crowned. SNUB IDLER –Adjustable 2 1/8 in. dia. pre-lubricated ball bearings. Guards included. RETURN IDLER –Adjustable 1.9 in. dia. pre-lubricated ball bearings. TAKE-UP –Take-ups in center drive provides 16 in. of belt take-up. BEARINGS –Sealed, pre-lubricated, self-aligning, ball bearings on drive and tail pulleys. Pre- lubricated ball bearings in tread rollers. SPEED REDUCTION –Sealed worm gear C-Face speed reducer. No. 50 roller chain to drive pulley. MOTOR –1/2 HP–208/230/460/575V–3 Ph.–60 Hz. Totally Enclosed C-Face. BELT SPEED –Constant 65 FPM. CAPACITY –Maximum load per linear foot of conveyor 225 lbs. NOT TO EXCEED capacity in charts. FLOOR SUPPORTS –Now supplied as optional equipment. RB FLOOR SUPPORTS –MS Type floor supports are available with a wide range of adjustment. Specify top of belt or roller elevation. One support required at every bed joint and ends of conveyor. Holes in feet for lagging to floor. Knee braces recommended above MS-6 support. BELT* –White Polymate 100 RMP-COS (cover one side), Black Trackmate 533 COS-PVC, Tan Glidetop. BELT SPEED* –Other constant and variable speeds. V-belt drive supplied on speeds under 17 FPM. END DRIVE –8 in. end drive mounted on end of unit. Requires underside take-up. LOW ELEVATION SIDE MOUNTED CENTER DRIVE –Motor reducer unit mounted to side of conveyor. Minimum 16 in. V-BELT DRIVE –V-Belt supplied between motor and reducer. Allow 65 in. O-RING DRIVE CHAIN –With sealed in lubricant (Recommended for applications that do not permit regular lubrication). UNDERSIDE TAKE-UP –Provides 16 in. of belt take-up. Extends down 15 7/8in. from top of belt. GUARD RAILS –Adjustable Universal Channel Guard Rail, fixed channel, type A & B angle. Fixed Channel overlapping, one direction. Fixed Channel nonoverlapping, reversing. See Accessory section. ROLLER CENTERS* –Tread rollers spaced on 3 in., 9 in., or 12 in. centers. PULLEYS –6 in. dia. tail with 1 3/16 in. dia. shaft at bearings in place of 4 in. when not furnished as standard. POLY-TIER SUPPORTS –36 in. to 120 in. support heights in 6 in. increments. Knee braces supplied. CEILING HANGERS –5/8 in. dia. x 8 ft. long unplated rods fully threaded. Other lengths and galvanized rods available. MOTORS –Energy efficient, single phase, brake motors, other characteristics. 2 HP maximum. ELECTRICAL CONTROLS –Non-reversing or reversible magnetic starter, and push-button stations. AC variable frequency drive. * NOTE : Capacity affected with these options. • OPTIONAL EQUIPMENT 8" DIA. DRIVE PULLEY HORIZONTAL LIVE LOAD CAPACITY @ 65 FPM HP BELT WIDTHS TO LENGTHS UP TO 52' 102' DISTRIBUTED LOAD (LBS.) 1/2 14" 24" 36" 48" 54" 2490 2280 1860 1520 1300 2150 1800 1170 620 350 1 14" 24" 36" 48" 54" 5500 5290 4870 4530 4000 5160 4810 4180 3630 3200 2 14" 24" 36" 48" 54" 11520 11320 10890 10550 10000 11170 10830 10200 9650 9200 • STANDARD SPECIFICATIONS

RkJQdWJsaXNoZXIy NjQ0OTEy