Hytrol Catalog

CATALOG | 08312018 CATALOG | 08312018 PCH Piano Hinge Parts Conveyor The Model PCH parts conveyor with hinged steel belt is ideal for carrying hot, oily parts from punch presses, forging machines, etc., to drums, hoppers, or other operations. Configurations range from straight to “Z” type units. • 5 Belt Widths • Piano Hinge Belt • Heavy-duty PCHS Type Adjustable Floor Supports Available SECTION X-X 1-1/4" BUTT COUPLING FRAME SPACER RETURN BELT 8-5/8" 2-1/4" BETWEEN RAIL WIDTH 1-7/8" BELT WIDTH OVERALL FRAME WIDTH 11" R "A" "X" "X" "A" "C" 45˚ TAKE-UP OPTIONAL PCHS SUPPORTS SHOWN DRIVE SPROCKET 8-5/8" 16-3/16" MAX. 16-1/2" MAX. 19-5/8" R. "B" "D" Overall Frame Width Between Rail Width Belt Width "A" "B" "C" "D" Weights (Lbs.) 4' 6' 4' 6' 4' 6' 10 3/8" 5 7/8" 6" 24" 4' or 6' 58" 75" 103 5/8" 120 5/8" 658 754 30" 115 5/8" 132 5/8" 711 807 36" 127 5/8 144 5/8" 755 851 12 3/8" 7 7/8" 8" 24" 4' 58" 75" 103 5/8" 120 5/8" 682 782 30" or 115 5/8" 132 5/8" 735 835 36" 6' 127 5/8 144 5/8" 781 881 16 3/8" 11 7/8" 12" 24" 4' 58" 75" 103 5/8" 120 5/8" 735 84 30" or 115 5/8" 132 5/8" 802 911 36" 6' 127 5/8 144 5/8" 843 952 22 3/8" 17 7/8" 18" 24" 4' 58" 75" 103 5/8" 120 5/8" 834 961 30" or 115 5/8" 132 5/8" 900 1027 36" 6' 127 5/8 144 5/8" 957 1084 28 3/8" 23 7/8" 24" 24" 4' 58" 75" 103 5/8" 120 5/8" 972 1123 30" or 115 5/8" 132 5/8" 1050 1201 36" 6' 127 5/8 144 5/8" 1116 1267 All weights in catalog are conveyor weights only. Accessories, crating, etc., are not included. PCH OVERHEAD END DRIVE –Located on discharge end of conveyor. Chain guard located on right hand side. BELT –Piano Hinge metal belt with 12 ga. plain bottom aprons. 2 1/2 in. pitch chain with 1 1/2 in. dia. hardened rollers with 7/16 in. dia. hinge axle. 1 1/2 in. high x 10 ga. continuous off-set side wing links. BED –8 5/8 in. deep x 10 ga. powder painted, formed steel channel. Modular bed sections bolt together with butt couplings. 45 ° standard incline section. BELT GUIDES –Steel angle mounted inside bed for tracking belt. DRIVE SPROCKETS –5 in. pitch dia. with 1 7/16 in. dia. shaft, 6 tooth. TAKE-UP SPROCKETS –5 in. pitch dia. with 1 7/16 in. dia. shaft, 6 tooth. TAKE-UP– Take-ups are provided to insure proper belt tension. BEARINGS –Sealed, re-lube bearings at drive and take-up. SPEED REDUCTION – Sealed worm gear speed reducer driven by V-belt. No. 60 roller chain to drive sprockets. MOTOR – 1 HP -208/230/460/575V-3 Ph. 60 Hz Premium Energy Efficient with torque limiter (Not a warranty item). BELT SPEED –Constant 30 FPM. CAPACITY –35 lbs. belt capacity per linear foot of conveyor. FLOOR SUPPORTS –Now supplied as optional equipment. • OPTIONAL EQUIPMENT FLOOR SUPPORTS –PCHSType floor supports are available with a wide range of adjustment. Specify top of belt or roller elevation. One support required at every bed joint and ends of conveyor. Holes in feet for lagging to floor. Knee braces recommended above PCHS-3 support. BELT –Perforated, pimpled, or pimpled and perforated. 1 1/2 in. or 2 in. high cleats. Contact factory. DRIP PANS –Mounted underneath conveyor frame for drainage. COVER –Mounted on top of conveyor frame to keep parts from falling back when conveyor is used at steep incline. INCLINES –30º, 45º, and 60º angles. Horizontal available. BED –2 ft. through 10 ft. intermediate beds available. MOTORS –Single phase, brakemotor, other characteristics. 2 HP maximum. ELECTRICAL CONTROLS –Magnetic starters, push button stations and AC variable frequency drive. BELT SPEED –Other constant and variable speeds. • STANDARD SPECIFICATIONS Model PCH design makes it ideal for positioning into or under punch presses and similar equipment. Horizontal discharge section allows easy positioning of hopper or drum for parts collection. Metal Piano Hinge belt provides continuous reliable service. Construction is heavy-duty with perforated apron plates and solid steel, heat-treated rollers.

RkJQdWJsaXNoZXIy NjQ0OTEy