Hytrol Catalog

CATALOG | 08312018 DWGNO Department HYTROL JONESBORO,ARKANSAS CONVEYORCO., INC. HYTROL DATE MODELS STANDARDTOLERANCES UNLESSOTHERWISESPECIFIED FRACTIONS ±1/64 DECIMALS ±.005 ANGLES ±1° C 12DE52cvr2.dwg MC THISDRAWINGCONTAINSCONFIDENTIAL DESIGNSAND INFORMATIONWHICHARE THEPROPERTYOFHYTROLCONVEYOR COMPANY INC.THISDRAWINGANDTHE INFORMATIONCONTAINEDHEREINMAYNOT BEDISCLOSEDORDUPLICATED INWHOLE ORPART,UTILIZED INANYOTHERWORK,OR USEDFORMANUFACTUREOFDESIGNS WITHOUTTHEPRIORWRITTENPERMISSION OFHYTROLCONVEYORCOMPANY INC. DRAWNBY engautomation DATE3/16/2018 PAINTCLASS REVISION 1 SPAREPART N P 1 NEWDRAWING REVISIONHISTORY REV DATE New RevisionNote TYPE ENGINEER HSS Parcel Belt Conveyor Designed for the parcel handling industry the bolted construction, for singulated flow application. • 8-5/8" Drive Pulley • 4" Tail Roller • 3-10 HP available • 16" Take-Up Length • Maxium Belt Pull is 1000 lbs. • Recommended 90' Maxium Overall Conveyor Length BetweenWidth 19" 25" 31" 37" 43" 45" 49" 61.5" Drive (Center) 646 850 1054 1258 1677 1530 1667 2091 Drive (End) 646 850 1054 1258 1677 1530 1667 2091 Intermediate Bed (10') 195 225 225 285 315 325 345 408 Tail Assembly 85.0 112.5 139.5 166.5 193.5 202.5 220.5 276.75 Nose-over Assembly 86 110 124 158 182 190 158 256 Notes: Above weights included 12" high side guard. Accessories, crating, etc. are not included in abover weights. Customer specified guarding available per order. 4” Diameter Tail Assembly 4” Diameter Take-Up 8 5/8” Diameter Drive Pulley HPS Type Support 4” Diameter Tail Assembly Overall Frame Width Optional Cable Rail (Customer to Supply Cables & Turnbuckles) Tail Pulley Hitch Assembly (Optional) Expanded Metal Underside Bed Covers Hinged on Both Sides Noseover Assembly 24” 15” Guard Rail Transition (30° or 45°) Optional End Drive 12” 4” Diameter Tail Roller 4” Diameter Tail CATALOG | 08312018 HSS BELT – Belting available per customer specification. BED –6 5/8" deep 12 ga. formed steel slider bed painted per customer specified color. CENTER DRIVE – Minimum elevation 15 1/2" DRIVE PULLEY –8 5/8" diameter lagged pulley with through shaft design. TAKE-UP ROLLER –4" diameter ROL-07S SNUB IDLER –2 3/4" diameter ROL-02 TAIL PULLEY –4" diameter ROL-07S DRIVE BEARINGS –Sealed, pre-lubricated, self-aligning, cast-iron ball bearing. MOTOR –Available from 3 to 10 HP. BELT SPEED –Available from 80 to 540 FPM. CAPACITY –100 lbs. per linear foot. FLOOR SUPPORTS –Available with a wide range of adjustment. Specify top of belt elevation. One support required at every bed joint and ends of conveyor. Holes in feet for lagging to floor. Knee bracing not included. BELT –Option per customer specifics. UNDERSIDE BED COVERS –Hinged expanded metal per customer specifics. NOSEOVER –Single noseover for transition from angled to horizontal position. HITCH –For transitioning of product from horizontal to incline only. TAIL ROLLER –4" diameter ROL-07SX (Spherical Roller Bearings) BEDS –Available in 3 1/2" deep (12 or 10 ga.) CABLE RAIL ASSEMBLY –For mounting cable MOTORS –3, 5, 7 1/2, 10 available. SIDE GUARDS/PAN –Available in 2" to 36" high (2" increments) SLAVE TAKE-UP –Available in all widths, for scanning applications. HITCH ASSEMBLY – 2° to 20° (1° increments) • OPTIONAL EQUIPMENT • STANDARD SPECIFICATIONS

RkJQdWJsaXNoZXIy NjQ0OTEy