Hytrol Catalog

CATALOG | 08312018 SIZE TO ORDER Overall Length "A" Between Rail Width 13” 15” 17" 19" 21" 23" 25" 27" 31" 33" 37" 39" Overall FrameWidth 16” 18” 20" 22" 24" 26" 28" 30" 34" 36" 40" 42" 5' 210 220 230 240 250 260 270 280 300 310 330 340 4' 184 194 204 214 224 234 244 254 274 284 304 314 3’ 158 168 178 188 198 208 218 228 248 258 278 288 • 1.9” Dia. x 16 Ga. Galvanized O-Ring-Slaved Rollers in a 6 1/2” x 12 Ga. Channel Frame • (2) 24 Volt DC Motors with Control Cards on 4’ and 5’ Gate or (1) 24 Volt DC Motor with Control Card on 3’ Gate • Power Supply - 27 VDC 4 AMP (Requires 120 VAC or 230 VAC Single Phase Input Voltage) • Non-Reversing • Hinge Mechanism with Die Springs • 65 FPM Constant Conveying Speed • Less Floor Supports 190-E24G - POWERED GATE WITH DIE SPRINGS IMPORTANT NOTES • WHEN ORDERING: Please specify section to which Gate Hinge Assembly will be attached. • NOTE: Gate is ONE DIRECTION ONLY. Contact factory for Reversing Application. • 3 ft. OAL Gates with 2 in. roller centers require TWO motors. • 4 ft. and 5 ft. OAL Gates with 2 in. roller centers require THREE motors. GATES • OPTIONAL EQUIPMENT 24 volt 5amp 460 volt Input Power Supply CATALOG | 08312018 GATES 19GSR-SBG GRAVITY DIE SPRING GATE ASSEMBLY 3”Roller Centers SIZE TO ORDER Between Rail Width 13" 15" 17" 19" 21” 23” 25” 27” 31” 33” 37” 39” Overall FrameWidth 16" 18" 20" 22" 24” 26” 28” 30” 34” 36” 40” 42” 5' 133 139 145 151 157 163 169 175 187 193 205 211 4' 117 122 127 132 137 142 147 152 162 167 177 182 19GSR-SBG GRAVITY DIE SPRING GATE ASSEMBLY 2”Roller Centers SIZE TO ORDER Between Rail Width 13" 15" 17" 19" 21” 23” 25” 27” 31” 33” 37” 39” Overall FrameWidth 16" 18" 20" 22" 24” 26” 28” 30” 34” 36” 40” 42” 5' 161 168 175 182 187 196 203 210 224 231 245 252 4' 144 151 158 165 172 179 186 193 207 214 228 235 • Painted Steel Frame • 1.9" dia. Galvanized Rollers on 2" or 3" centers • Hinge MechanismWith Die Springs and Gravity Section • Latch Mechanism • Lift Handles On Both Sides • Less Floor Supports Photo shown is Spring Balanced Gate for 1.9 in. dia. roller conveyor. PREFERRED FLOW PREFERRED FLOW GRAVITY DIE SPRING BALANCED GATE ASSEMBLY Spring Balanced Gates can be used with several types of gravity wheel and roller conveyor. Gates provide a passageway for personnel, lift trucks, and other equipment. Tension springs are easily adjusted to provide minimum weight lift.

RkJQdWJsaXNoZXIy NjQ0OTEy