Hytrol Catalog

CATALOG | 08312018 EZLOGIC ® COMPONENTS Hytrol has once again created the most advanced zero-pressure accumulation system in the world. While featuring the same EZLogic® familiarity, GEN3 incorporates new technologies for ease of installation, operation, and maintenance. The components listed are used on the following conveyors: 138-NSPEZ, 190-NSPEZ, 190-NSPEZC, ABEZ, 190-PREZ, 190-PREZC, 25-LREZ, 199-CREZD, 25-CREZD, 36-CREZD, CCEZ, DCEZ-60, DCEZ-63, DCEZ-82, DCEZ-83, and PLEZD. ZONE CONTROLLERS Retro-Reflective Type Zone Controller Zone controller including mounting base and unitized retro-reflective transducer. 032.501 Diffuse Type Zone Controller Zone controller including mounting base and unitized diffuse transducer with adjustable sensitivity (through programming). 032.502 032.502 Enhanced Retro-Reflective Zone Controller Same as standard, plus used for IOP communication, and addressable remote access. 032.50 032.505 Enhanced Diffuse Zone Controller Same as standard, plus used for IOP communication, and addressable remote access. 032.506 032.506 Remote Zone Controller Zone controller including mounting base. Connectorized for attaching any remote transducer. 032.504 Enhanced Remote Zone Controller Enhanced zone controller including mounting base. Connectorized for attaching any remote transducer. Same as standard, plus used for IOP communication, and addressable remote access. 032.507 TRANSDUCERS (SENSORS) Remote Diffuse Transducer (Narrow Beam) Has narrow beam for use with close roller centers. Attaches to any remote zone controller and allows transducer to be mounted separate from controller. 032.513 CORDSETS Zone Controller Cordset (Zone to Zone Communication) Available for the following zone lengths: 12”.....................................................................032.551 18”.....................................................................032.552 24”.....................................................................032.553 30”.....................................................................032.554 36”.....................................................................032.555 48”.....................................................................032.556 60”.....................................................................032.557 72”.....................................................................032.558 Zone Controller Screw-On Cordset (NEMA 4X Zone to Zone Communication for Wash Down Application) Available for the following zone lengths: 12”.....................................................................032.5515 18”.....................................................................032.5525 24”.....................................................................032.5535 30”.....................................................................032.5545 36”.....................................................................032.5555 48”.....................................................................032.5565 60”.....................................................................032.5575 72”.....................................................................032.5585 U.S. Patent Numbers 5,862,907 • 7,243,781 • 7,591,366 • Other Patents Pending. CATALOG | 08312018 EZLOGIC ® COMPONENTS CORDSETS (continued) Infeed Zone Terminator Terminates zone to zone communication at infeed zone. 032.550 Mounting Base Use to mount any Zone Controller. 032.517 IOP IOP Provides 27VDC, 100 watt power for EZLogic“ accumulation system. Requires 120 VAC or 230 VAC single phase input. Operates up to 50 zones (25 zones each side of IOP).– contains slots for 4 input/output boards. Requires enhanced zone controllers to communicate with input/output boards. 032.582 IOP“T”Cable Required to deliver power and IOP communication from IOP to zone controllers. Max. of 25 zones per each branch of T. Standard Push-On ..................................032.559 I/O Board Plugs into slot in IOP to provide two input/output connections. Requires enhanced controller to receive signal. 032.583 CONFIGURATION/DIAGNOSTIC COMPONENTS Push Button Programmer Plugs into auxiliary port of any controller to configure certain features of controller. Required for customization of factory default settings. 032.535 Programming Kit for PC and PC Adaptor Used to connect PC USB port to auxiliary port of any controller. Includes GenesisTM configuration software. Used to configure all features of controller. Required for customization of factory default settings. K-01554 NOTE : All GEN3 EZLogic® Components are List Price.

RkJQdWJsaXNoZXIy NjQ0OTEy