Hytrol Catalog

CATALOG | 08312018 DC-82 Drag Chain Conveyor The Model DC-82 is a two strand drag chain conveyor designed to handle pallets. • 10 Widths • Modular Assembly • Adjustable DCS and DCDS-Type Floor Supports Available SECTION X-X HOW IT WORKS The conveyor is made up of drive, intermediate and tail sections on which two strands of #80 single-pitch chain travel. Each strand is a continuous loop and driven by a common drive shaft. SIZE TO ORDER OVERALL LENGTH“A” FRAMEWIDTH 26 1/2” 29 1/2” 32 1/2” 35 1/2” 38 1/2” 41 1/2” 44 1/2” 47 1/2” 50 1/2” 53 1/2” STRAND CENTERS 24” 27” 30” 33” 36” 39” 42” 45” 48” 51” 7’ Per Foot Weight 583 604 625 646 667 688 709 730 751 772 52 55 58 61 64 67 70 73 76 79 All weights in catalog are conveyor weights only. Accessories, crating, etc., are not included. 12” INTERMEDIATE SECTION 6O” DRIVE SECTION FILL PLATE “X” “X” 24” MIN. #80 SINGLE PITCH CHAIN CENTER DRIVE SECTION OPTIONAL SUPPORT W/ ADJ. FOOT PAD SHOWN 14” MIN. CATALOG | 08312018 DC-82 CHAIN – #80 single pitch conveyor chain (straight sidebar). CHAIN GUIDE – UHMW polyethylene. FRAME – 6 in. x 4 ga. powder painted formed steel angle with 2 in. x 1/4 in. thick wall, chain support tube. 4 ga. formed coupling channels located at infeed and discharge ends of each module. MOTOR –2 HP – 208/230/460/575V– 3 PH. 60 HZ. gearmotor, located underneath in 5 ft. long module. DRIVE SPROCKETS – Hardened #80 with 1 1/2 in. dia. steel shaft. BEARINGS – Sealed, pre-lubricated, self aligning, ball bearings on drive. CONVEYING SPEED –30 FPM. CAPACITY –5800 lbs. maximum at 30 FPM (2 HP maximum). NOT TO EXCEED CAPACITY IN CHART. FLOOR SUPPORTS –Now supplied as optional equipment. • OPTIONAL EQUIPMENT FLOOR SUPPORTS –DCSandDCDSTypefloorsupportsareavailablewithawiderangeofadjustment. Specify top of chain elevation. One support required at every bed joint and ends of conveyor. Holes in feet for lagging to floor. MOTORS –3 HP maximum. CLOSED TAIL –Overall length will be affected. CONVEYING SPEED –Speeds other than 30 FPM will require gear box change (contact factory). • STANDARD SPECIFICATIONS NOTE : Product footprint may affect drive capacity. MAXIMUM UNIT LOAD–4000 lbs. LOAD CAPACITY CHART (Live)* @ 30 FPM HP TOTAL LOAD (Lbs.) UP TO 50’ UP TO 102’ 2 5800 5500

RkJQdWJsaXNoZXIy NjQ0OTEy