Hytrol Catalog

CATALOG | 08312018 DC-63 Drag Chain Conveyor The Model DC-63 is a three strand drag chain conveyor designed to handle pallets. • 11Widths • Modular Assembly • Adjustable DC3S and DCDS-Type Floor Supports vailable SECTION X-X HOW IT WORKS The conveyor is made up of drive, intermediate and tail sections on which three strands of #60 single-pitch chain travel. Each strand is a continuous loop and driven by a common drive shaft. SIZE TO ORDER OVERALL LENGTH“A” FRAMEWIDTH 37 7/8” 43 7/8” 49 7/8” 55 7/8” 61 7/8” 67 7/8” 73 7/8” 79 7/8” 85 7/8” 91 7/8” 99 7/8” STRAND CENTERS 18” 21” 24” 27” 30” 33” 36” 39” 42” 45” 48” 7’ Per Foot Weight 650 675 699 724 748 775 801 826 850 871 900 55 58 61 64 67 70 73 76 79 82 85 All weights in catalog are conveyor weights only. Accessories, crating, etc., are not included. 12” INTERMEDIATE SECTION 6O” DRIVE SECTION “X” 18" MIN. 18" MIN. FILL PLATE “X” 18" MIN. 18" MIN. #60 SINGLE PITCH CHAIN CENTER DRIVE SECTION OPTIONAL SUPPORT W/ ADJ. FOOT PAD SHOWN 12” MIN. CATALOG | 08312018 DC-63 CHAIN – #60 single pitch conveyor chain (straight sidebar). CHAIN GUIDE – UHMW polyethylene. FRAME – 6 in. x 7 ga. powder painted formed steel angle with 1 1/2 in. x 3/16 wall, chain support tube. 4 ga. formed coupling channels located at infeed and discharge ends of each module. MOTOR –1 1/2 HP – 208/230/460/575V– 3 PH. 60 HZ. gearmotor, located underneath in 5 ft. long module. DRIVE SPROCKETS – Hardened #60 with 1 3/8 in. dia. steel shaft. BEARINGS – Sealed, pre-lubricated, self aligning, ball bearings on drive. CONVEYING SPEED –35 FPM. CAPACITY –5800 lbs. maximum at 30 FPM (1 1/2 HP maximum). NOT TO EXCEED CAPACITY IN CHART. FLOOR SUPPORTS –Now supplied as optional equipment. • OPTIONAL EQUIPMENT FLOOR SUPPORTS –DC3S and DCDS Type floor supports are available with a wide range of adjustment. Specify top of chain elevation. One support required at every bed joint and ends of conveyor. Holes in feet for lagging to floor. MOTORS –1 1/2 HP maximum. CLOSED TAIL –Overall length will be affected. CONVEYING SPEED –Speeds other than 30 FPM will require gear box change (contact factory). • STANDARD SPECIFICATIONS NOTE : Product footprint may affect drive capacity. MAXIMUM UNIT LOAD–3000 lbs. LOAD CAPACITY CHART (Live)* @ 30 FPM HP TOTAL LOAD (Lbs.) UP TO 50’ UP TO 102’ 1 1/2 5800 5600

RkJQdWJsaXNoZXIy NjQ0OTEy