Hytrol Catalog

CATALOG | 08312018 DC-62 Drag Chain Conveyor The Model DC-62 is a two strand drag chain conveyor designed to handle pallets. • 11Widths • Modular Assembly • Adjustable DCS and DCDS-Type Floor Supports Available SECTION X-X HOW IT WORKS The conveyor is made up of drive, intermediate and tail sections on which two strands of #60 single-pitch chain travel. Each strand is a continuous loop and driven by a common drive shaft. SIZE TO ORDER OVERALL LENGTH“A” FRAMEWIDTH 19 7/8” 22 7/8” 25 7/8” 28 7/8” 31 7/8” 34 7/8” 37 7/8” 40 7/8” 43 7/8” 46 7/8” 49 7/8” STRAND CENTERS 18” 21” 24” 27” 30” 33” 36” 39” 42” 45” 48” 7’ Per Foot Weight 433 450 466 483 499 517 534 551 567 581 600 37 39 41 43 45 47 49 51 53 55 57 All weights in catalog are conveyor weights only. Accessories, crating, etc., are not included. FILL PLATE 12” INTERMEDIATE SECTION 6O” DRIVE SECTION “X” “X” 18” MIN. #60 SINGLE PITCH CHAIN CENTER DRIVE SECTION OPTIONAL SUPPORT W/ ADJ. FOOT PAD SHOWN 12” MIN. CATALOG | 08312018 DC-62 CHAIN – #60 single pitch conveyor chain (straight sidebar). CHAIN GUIDE – UHMW polyethylene. FRAME – 6 in. x 7 ga. powder painted formed steel angle with 1 1/2 in. x 3/16 wall, chain support tube. 4 ga. formed coupling channels located at infeed and discharge ends of each module. MOTOR –1 1/2 HP – 208/230/460/575V– 3 PH. 60 HZ. gearmotor, located underneath in 5 ft. long module. DRIVE SPROCKETS – Hardened #60 with 1 3/8 in. dia. steel shaft. BEARINGS – Sealed, pre-lubricated, self aligning, ball bearings on drive. CONVEYING SPEED –35 FPM. CAPACITY –6000 lbs. maximum at 35 FPM (1 1/2 HP maximum). NOT TO EXCEED CAPACITY IN CHART. FLOOR SUPPORTS –Now supplied as optional equipment. • OPTIONAL EQUIPMENT FLOOR SUPPORTS –DCSandDCDSTypefloorsupportsareavailablewithawiderangeofadjustment. Specify top of chain elevation. One support required at every bed joint and ends of conveyor. Holes in feet for lagging to floor. MOTORS –1 1/2 HP maximum. CLOSED TAIL –Overall length will be affected. CONVEYING SPEED –Speeds other than 35 FPM will require gear box change (contact factory). • STANDARD SPECIFICATIONS NOTE : Product footprint may affect drive capacity. MAXIMUM UNIT LOAD–6000 lbs. LOAD CAPACITY CHART (Live)* @ 35 FPM HP TOTAL LOAD (Lbs.) UP TO 50’ UP TO 102’ 1 1/2 6000 6000

RkJQdWJsaXNoZXIy NjQ0OTEy