Hytrol Catalog

CATALOG | 08312018 25/26-CRRC Chain Driven Live Roller Conveyor (Roll-to-Roll Type) The Model 25/26-CRRC is a heavy-duty, chain driven roller curve conveyor commonly used in conjunction with the 25/26-CRR conveyor to carry heavy unit loads such as drums. Can be used in industries like bottling and steel manufacturing. Product orientation could be affected with straight roller curves. • 16Widths • Reversible • Chain Driven Rollers • Can Be Slave-driven from 25-CRR • Adjustable HSN-Type Floor Supports Available SECTION X-X ROLLER BED 14-1/8" OPTIONAL HSN SUPPORTS SHOWN 2" 20-1/8" SECTION Y-Y BETWEEN RAIL WIDTH CONVEYING SURFACE FRAME SPACER 1-5/8" 3-1/4" LOWER CHAIN GUARD 5-7/8" 1-1/2" OVERALL FRAME WIDTH UPPER CHAIN GUARD NO. 50A18 SPROCKET 2" 4" 6" 20-1/8" 14-1/8" 3/8" 4" 18-1/2" 1-5/8" CONVEYING SURFACE WIDTH BETWEEN RAIL WIDTH OVERALL BED WIDTH OUTSIDE RADIUS INSIDE RADIUS NO OF ROLLERS WEIGHTS 30° 45° 60° 90° 30° 45° 60° 90° 30° 45° 60° 90° 30° 45° 60° 90° 15 3/4" 19" 22 1/4" 77 3/4" 65 1/8" 77 7/8" 71 1/2" 58 3/4" 46 1/8" 58 7/8" 52 1/2" 8 10 16 22 364 403 503 607 17 3/4" 21" 24 1/4" 56 3/4" 44 1/8" 56 7/8" 50 1/2" 374 414 517 628 19 3/4" 23" 26 1/4" 54 3/4" 42 1/8" 54 7/8" 48 1/2" 384 425 532 648 21 3/4" 25" 28 1/4" 52 3/4" 40 1/8" 52 7/8" 46 1/2" 393 436 547 669 23 3/4" 27" 30 1/4" 50 3/4" 38 1/8" 50 7/8" 44 1/2" 403 447 562 689 27 3/4" 31" 34 1/4" 110" 102 1/2" 98 3/4" 95" 79" 71 1/2" 67 3/4" 64" 10 14 18 26 478 567 657 858 29 3/4" 33" 36 1/4" 77" 69 1/2" 65 3/4" 62" 489 581 674 881 33 3/4" 37" 40 1/4" 73" 65 1/2" 61 3/4" 58" 512 609 707 928 35 3/4" 39" 42 1/4" 71" 63 1/2" 59 3/4" 56" 523 523 724 952 39 3/4" 43" 46 1/4" 67" 59 1/2" 55 3/4" 52" 546 651 757 999 43 3/4" 47" 50 1/4" 63" 55 1/2" 51 3/4" 48" 568 679 790 1046 47 3/4" 51" 54 1/4" 59" 51 1/2" 47 3/4" 44" 590 707 824 1092 49 3/4" 53" 56 1/4" 120" 112 1/2" 108 3/4" 105*" 67" 59 1/2" 55 3/4" 52" 612 735 852 1137 51 3/4" 55" 58 1/4" 65" 57 1/2" 53 3/4" 50" 634 763 880 1182 53 3/4" 57" 60 1/4" 63" 55 1/2" 51 3/4" 48" 656 791 908 1227 55 3/4" 59" 62 1/4" 61" 53 1/2" 49 3/4" 46" 678 819 936 1272 All weights in catalog are conveyor weights only. Accessories, crating, etc., are not included Note : Add 25% for 26 Rollers 14-1/2" ALLOW 16" "IR" 30 ° "OR" ALLOW 16" "IR" "OR" 45˚ 14-1/2" "X" "Y" "IR" 90˚ C CURVE 14-1/2" ALLOW 16" "OR" "IR" 60 ° 14-1/2" ALLOW 16" L "OR" "X" "Y" Conveyor shown with optional floor supports CATALOG | 08312018 25/26-CRRC BED –Roller bed with 2 1/2 in. dia. x 11 ga. unplated rollers mounted in 4 in. x 4 ga. powder painted formed steel channel frame. DRIVE –Mounted underneath, placed near center of conveyor. DRIVE CHAIN –No. 50 circular roller chain. CHAIN GUARD –Formed steel, upper and lower chain guard mounted to top and bottom of channel frame to totally enclose drive chains. BEARINGS –Sealed, pre-lubricated ball bearings. BUTT COUPLINGS –Standard for connecting to 25-CRR, 2 1/2 in. dia. or 2 5/8 in. dia. gravity roller conveyor. SPEED REDUCTION –Sealed worm gear C-Face speed reducer. MOTOR –1 HP–208/230/460/575V–3 Ph. 60 Hz. Premium Energy Efficient C-Face. CONVEYING SPEED –Constant 30 FPM. CAPACITY –4000 lbs. total distributed live load at 30 FPM. FLOOR SUPPORTS –Now supplied as optional equipment. • OPTIONAL EQUIPMENT FLOOR SUPPORTS –HSN Type floor supports are available with a wide range of adjustment. Specify top of belt or roller elevation. One support required at every bed joint and ends of conveyor. Holes in feet for lagging to floor. Knee braces recommended above HSN-3 support. CONVEYING SPEED –Other constant and variable speeds. V-belt drive supplied on speeds under 12 FPM (1 HP). Note : Capacity affected with speed change. TOP SIDE MOUNTED DRIVE –Motor reducer unit mounted to side of conveyor with drive chain through top of chain guard. Specify clearances. Minimum elevation top of rollers 6 1/2 in. V-BELT DRIVE –V-belt supplied between motor and reducer. O-RING DRIVE CHAIN –With sealed in lubricant (Recommended for applications that do not permit regular lubrication). FRAMES –4 in. x 5.4 lb. structural channel. GUARD RAILS –Fixed angle (2 in. high x 1/4 in. steel) guard bolts to top of flange of channel opposite chain guard. ROLLERS SET LOW –Use angle guard rail. TREAD ROLLERS –2 5/8 in. dia. x 7 ga. steel, 11/16 in. hex spring-loaded shaft (26-CRRC). MOTORS –Single phase, brakemotor, other characteristics. 1 HP maximum. TANGENTS –Lengths available on 5 in. increments (5 in. roller centers) up to 45 in. OAL. Other roller centers and lengths available (jackshaft required), contact factory. ELECTRICAL CONTROLS –Non-reversing or reversible magnetic starters and push-button stations. AC variable frequency drive. • STANDARD SPECIFICATIONS

RkJQdWJsaXNoZXIy NjQ0OTEy