Hytrol Catalog

CATALOG | 08312018 Carryline Plastic Chain Conveyor ALT1000 The ALT1000 is a plastic chain belt conveyor with anodized aluminumbeam frame designed to carry light weight products. The components can be combined in many different ways; therefore the system can grow as production increases. • 4 Belt Widths - White Acetal • Anodized Aluminum Beam Frames • Module Design • 1/2HP - 230/460/575V Shaft Mounted Gearmotor • Tubular Guide Rails Included • Floor supports not included Section Length Series 140 220 620 830 Overall Beam Width 141 mm 224 mm 64 mm 86 mm Beam Height 65 mm 62.5 mm 65 mm 65 mm 3.1 m (10.17 ft) Weights (lbs.) 84 lbs 93 lbs 104 lbs 125 lbs Per Meter (1 m = 3.28 ft) Weights (lbs.) 27.1 lbs 30.1 lbs 33.6 lbs 40.3 lbs NOTE : • Idler and Drive Lengths included in Overall length. Idler is 500 mm and Drive is 500 mm. BELT –White Acetal finger chain available in 4 widths. FRAME –Anodized Aluminum Beam Frame available in 4 widths. BEARINGS –Sealed, pre-lubricated, self-aligning, ball bearings on drive and tail pulley. Re-lube type. GUARD RAILS –Aluminum Round with brackets GEARMOTOR – 1/2HP 230/460/575V Shaft Mounted Drive BELT SPEED – 58 feet per min constant speed (17.68 meters per min) CAPACITY –50 lbs per foot at 58 ft per minute with clean environmental conditions FLOORSUPPORTS –Nowsuppliedasoptionalequipment. Seechartbelow foravailableelevations. • STANDARD SPECIFICATIONS DWGNO Department HYTROL JONESBORO,ARKANSAS CONVEYORCO., INC. HYTROL DATE MODELS STANDARDTOLERANCES UNLESSOTHERWISESPECIFIED FRACTIONS ±1/64 DECIMALS ±.005 ANGLES ±1° C 23565 Configuration Design THIS DRAWING CONTAINS CONFIDENTIAL DESIGNS AND INFORMATION WHICH ARE THE PROPERTY OF HYTROL CONVEYOR COMPANY INC. THIS DRAWING AND THE INFORMATION CONTAINED HEREIN MAY NOT BE DISCLOSED OR DUPLICATED IN WHOLE OR PART, UTILIZED IN ANY OTHER WORK, OR USED FOR MANUFACTURE OF DESIGNS WITHOUT THE PRIOR WRITTEN PERMISSION OF HYTROL CONVEYOR COMPANY INC. DRAWN BY Tiffany Hayden DATE 1/ PAINTCLASS REVISIO SPAREPART 500 mm 500 mm 2099 mm Idler Drive • OPTIONAL EQUIPMENT ROLLER TRANSFER – Available on all series. BELTS –Friction Chain Available in 4 widths GEARMOTORS –other HP’s available, 3/4 HP maximum GUARD RAILS –Flat Face UHMW and Slide Rail ELECTRICAL CONTROLS –AC variable frequency drives available BENDS & CURVES –See chart for options & contact factory for wheel bend application. Horizontal Bends Series Angle Radius 300 mm 400 mm 500 mm 600 mm 140 141 mm wide 15 6.4 lbs 7.3 lbs 7.5 lbs 8.4 lbs 30 7.5 lbs 9.3 lbs 10.4 lbs 14.8 lbs 45 9.5 lbs 11.5 lbs 13.1 lbs 18.3 lbs 90 14.8 lbs 18.3 lbs 21.9 lbs 29.3 lbs 220 224 mm wide 15 N/A 12.6 lbs N/A 11.5 lbs 30 16.3 lbs 19 lbs 45 20.1 lbs 23.2 lbs 90 32.2 lbs 37.2 lbs Series Angle Radius 191 289 389 489 589 620 64 mm wide 15 5.2 lbs 5.7 lbs 6 lbs 6.4 lbs 6.8 lbs 30 6 lbs 7.1 lbs 7.8 lbs 8.8 lbs 9.7 lbs 45 6.8 lbs 8.4 lbs 9.7 lbs 11 lbs 12.6 lbs 90 9.7 lbs 12.6 lbs 15.3 lbs 18.3 lbs 21.2 lbs Series Angle Radius 150 200 300 500 600 830 86 mm wide 15 4.9 lbs 5.1 lbs 5.6 lbs 6.4 lbs 6 lbs 30 5.5 lbs 6 lbs 7.1 lbs 8.8 lbs 13.3 lbs 45 6.2 lbs 7.1 lbs 8.4 lbs 11.3 lbs 16.3 lbs 90 8.4 lbs 10 lbs 12.9 lbs 18.6 lbs 25.6 lbs NOTE : • Weight includes (2) 80 mm tangets and belt on top and bottom. • Floor supports, drive, and idler are not included in weight. Vertical Bends Series Angle Radius 400 mm 860 mm 140 141 mm wide 5 n/a 2.9 lbs 30 5.7 lbs 11 lbs 45 7.9 lbs 15.9 lbs 60 10.4 lbs 21 lbs 90 15 lbs 31 lbs 220 224 mm wide 5 n/a 4.2 lbs 30 19.4 lbs 45 28 lbs 60 36.9 lbs 90 54.1 lbs 620 64 mm wide 5 n/a 2.2 lbs 30 4.9 lbs 9.5 lbs 45 7.5 lbs 13.7 lbs 60 8.9 lbs 17.9 lbs 90 12.8 lbs 26.3 lbs 830 86 mm wide 5 n/a 2.2 lbs 30 4.9 lbs 9.5 lbs 45 7.5 lbs 13.7 lbs 60 8.9 lbs 17.9 lbs 90 12.8 lbs 26.3 lbs Standard fingerchain belt shown.

RkJQdWJsaXNoZXIy NjQ0OTEy