Hytrol Catalog

CATALOG | 08312018 PCX END DRIVE –Located on discharge end of conveyor. Chain guard located on left hand side. BELT –Black Trackmate 533 COS-PVC (cover one side) with 1”high steel angle cleats on 12” centers.. Clipper lacing. BED –7 1/4 in. x 12 ga. powder painted steel, formed side channel with bolted in slider bed which provides 1 in. high sides above belt. BELT SCRAPER –Mounted inside conveyor bed section to clean underside of return belt. PORTABLE SUPPORT –Undercarriage is adjustable from 4 in. to 30 in. with 6 in. dia. rubber wheels. DRIVE PULLEY –4 in. dia. with 1 in. dia. shaft at bearings, machine crowned and fully lagged. TAIL PULLEY –4 in. dia. with 1 in. dia. shaft at bearings, machine crowned. BELT RETURN –Belt cleats slide on flat metal return guide. TAKE-UP –Take-ups at tail pulley. Provides 6 in. of belt take-up. BEARINGS –Sealed, pre-lubricated ball bearings on drive and tail pulleys. SPEED REDUCTION –Sealed worm gear C-Face speed reducer. No 50. roller chain to drive pulley MOTOR –1/2 HP–208/230/460/575V–3 Ph. 60 Hz. Totally Enclosed C-Face. BELT SPEED –Constant 25 FPM maximum. CAPACITY –100 lbs. total distributed live load. • OPTIONAL EQUIPMENT FLOOR SUPPORTS –MS Type floor supports are available with a wide range of adjustment. Specify top of belt or roller elevation. One support required at every bed joint and ends of conveyor. Holes in feet for lagging to floor. Knee braces recommended above MS-3 support. OVERHEAD END DRIVE –Motor reducer unit mounted 9 1/4 in. above cleat. V-BELT DRIVE –V-belt supplied between motor and reducer. O-RING DRIVE CHAIN– With sealed in lubricant (Recommended for applications that do not permit regular lubrication). INCLINE –45 ° in place of standard 36 ° requires 15 3/4” incline section. Other horizontal and incline lengths available. MOTORS –Energy efficient, single phase, brakemotor, other characteristics. 1 HP maximum. ELECTRICAL CONTROLS –One direction manual start switch, non-reversing magnetic starters, push button stations, power cord. AC variable frequency drive. • STANDARD SPECIFICATIONS

RkJQdWJsaXNoZXIy NjQ0OTEy