Hytrol Catalog

CATALOG | 08312018 DC-82 CHAIN – #80 single pitch conveyor chain (straight sidebar). CHAIN GUIDE – UHMW polyethylene. FRAME – 6 in. x 4 ga. powder painted formed steel angle with 2 in. x 1/4 in. thick wall, chain support tube. 4 ga. formed coupling channels located at infeed and discharge ends of each module. MOTOR –2 HP – 208/230/460/575V– 3 PH. 60 HZ. gearmotor, located underneath in 5 ft. long module. DRIVE SPROCKETS – Hardened #80 with 1 1/2 in. dia. steel shaft. BEARINGS – Sealed, pre-lubricated, self aligning, ball bearings on drive. CONVEYING SPEED –30 FPM. CAPACITY –5800 lbs. maximum at 30 FPM (2 HP maximum). NOT TO EXCEED CAPACITY IN CHART. FLOOR SUPPORTS –Now supplied as optional equipment. • OPTIONAL EQUIPMENT FLOOR SUPPORTS –DCSandDCDSTypefloorsupportsareavailablewithawiderangeofadjustment. Specify top of chain elevation. One support required at every bed joint and ends of conveyor. Holes in feet for lagging to floor. MOTORS –3 HP maximum. CLOSED TAIL –Overall length will be affected. CONVEYING SPEED –Speeds other than 30 FPM will require gear box change (contact factory). • STANDARD SPECIFICATIONS NOTE : Product footprint may affect drive capacity. MAXIMUM UNIT LOAD–4000 lbs. LOAD CAPACITY CHART (Live)* @ 30 FPM HP TOTAL LOAD (Lbs.) UP TO 50’ UP TO 102’ 2 5800 5500