Hytrol Catalog

CATALOG | 08312018 HSS-HD BELT – Belting available per customer specification. BED –3 1/2" deep 10 ga. or 12 ga. formed steel slider bed painted per customer specified color. CENTER DRIVE – Minimum elevation 15 1/2" DRIVE PULLEY –8 5/8" diameter lagged pulley with through shaft design. TAKE-UP PULLEY –6" diameter SNUB IDLER –3 1/2" diameter ROL-04 TAIL PULLEY –4" diameter solid shaft DRIVE BEARINGS –Sealed, pre-lubricated, self-aligning, cast-iron spherical roller bearing. MOTOR –Available from 3 to 20 HP. BELT SPEED –Available from 80 to 540 FPM. CAPACITY –150 lbs. per linear foot. Do not exceed capacity in chart below. FLOOR SUPPORTS –Available with a wide range of adjustment. Specify top of belt elevation. One support required at every bed joint and ends of conveyor. Holes in feet for lagging to floor. Knee bracing not included. BELT –Option per customer specifics. UNDERSIDE BED COVERS –Hinged expanded metal per customer specifics. NOSEOVER –Single noseover for transition from angled to horizontal position. BEDS –Available in 6 5/8" deep (12 ga.) CABLE RAIL ASSEMBLY –For mounting cable MOTORS –3, 5, 7 1/2, 10, and 15 available. SIDE GUARDS/PAN –Available in 2" to 36" high (2" increments) HITCH ASSEMBLY – 2° to 20° (1° increments) • OPTIONAL EQUIPMENT • STANDARD SPECIFICATIONS HP Selection Chart LENGTH SPEED (FPM) 15' 25' 50' 75' 100' 125' 150' 55 3 3 5 5 7.5 10 10 75 3 3 5 5 7.5 10 10 100 3 3 5 7.5 7.5 10 15 125 3 3 5 7.5 10 10 15 150 3 3 5 7.5 10 15 15 250 3 3 7.5 10 15 15 20 350 3 5 7.5 10 15 20 20 450 3 5 10 15 20 20 NA 540 3 5 10 15 20 NA NA Note: HP calculations based on 6000 PPH. For higher rate, contact factory.

RkJQdWJsaXNoZXIy NjQ0OTEy