Hytrol Catalog

CATALOG | 08212019 Slider Bed Curve SBC The Model SBC provides a positive flow of products by means of a belt, driven by tapered pulleys. Conveyor is versatile in that it can transport a wide variety of products. Available in 45°, 60° and 90° turns. • 9 Belt Widths • Endless Splice Belt • Quick Belt Change • Full LengthWindow BELT –Endless splice PUR belt with guide profile. BED –8 7/8" top of belt inside, outside guard 10 3/4", 12 ga stainless steel slider bed. SHAFT MOUNTED DRIVE –Nord right angle helical bevel gearmotor, discharge outside radius. PULLEYS –Tapered pulleys with 1 7/16" diameter shaft at bearings. Infeed pulley is adjustable to control belt tension. FLOOR SUPPORTS –MS type supports are available in a wide range of adjustments, holes in feet for lagging to floor knee braces recommended above MS-6 supports. BEARINGS –Sealed, self-aligning, ball bearings. ELECTRICAL CONTROLS – AC variable frequency drive and Disconnect Switch BELT SPEED – 24 fpm to 235 fpm. CAPACITY –Maximum load per linear foot (measured at center line of conveying surface) 40 lbs. GUARD RAILS –2" outside only. MOTOR –1 hp shaft mounted right angle gearmotor 208/230/460/575V - 3PH 60HZ (Specify Voltage) BELT –Types and styles other than standard are avialable (contact factory). GUARD RAILS –3-1/2" - 12" tall available for all sizes. ELECTRICAL CONTROLS –Non-reversing magnetic starters and push-button stations. CUSTOM COLORS –Available (contact factory). Paint chip must be provided. MOTOR –Other HP available 3 HP max. BELT SPEED –Up to 600 fpm available with optional hp motors. POLY-TIER SUPPORTS –36" to 120". heights in 6" increments knee braces supplied. Note: Clearance must be allowed for belt removal. CEILING HANGERS –5/8" diameter x 8' long unplated rods fully threaded. Other lengths and galvanized rods available. Note: Clearance must be allowed for belt removal. • OPTIONAL EQUIPMENT • STANDARD SPECIFICATIONS Conveyor shown with optional floor supports 90° Inside Radius Conveying Surface Centerline Radius Outside Radius Conveying Surface Belt Width (Effective) 6 1/4 OAW 1 1/8 Optional Type B Guard Rail Standard Type A Guard Rail Drive Outside Left Hand Curve Right Hand Curve 8 7/8 10 3/4 OAW Frame Conveying Surface Width Belt Width Radius Weight (Lbs.) Actual Effective Inside Centerline Outside 45° 60° 90° 28-3/8" 21" 22-1/8" 20" 36" 46 1/2" 57" 311 364 552 30-3/8" 23" 24-1/8" 22" 34" 45 1/2" 317 371 561 32-3/8" 25" 26-1/8" 24" 32" 44 1/2" 323 379 570 34-3/8" 27" 28-1/8" 26" 54" 67 1/2" 81" 446 510 687 36-3/8" 29" 30-1/8" 28" 52" 66 1/2" 453 519 699 38-3/8" 31" 32-1/8" 30" 50" 65 1/2" 460 529 711 40-3/8" 33" 34-1/8" 32" 48" 64 1/2" 467 538 723 42-3/8" 35" 36-1/8" 34" 46" 63 1/2" 474 548 735 44-3/8" 37" 38-1/8" 36" 44" 62 1/2" 481 557 747 All weights in catalog are CONVEYORWEIGHTS ONLY. Accessories, crating, etc., are not included.

RkJQdWJsaXNoZXIy NjQ0OTEy