Hytrol Catalog

CATALOG | 08312018 36-CRRH Heavy Duty Chain Driven Live Roller with Hex Shaft (Roll-to-Roll Type) The Model 36-CRRH is a heavy-duty, chain driven roller conveyor. Its tough, rugged design allows it to provide service under demanding manufacturing operations. Use the 36-CRRH for conveying heavy pallets and drums. • 12 BedWidths • Center Drive • Energy Efficient Motor - AC Variable Speed Controller • Reversible • Chain Driven Rollers • Fixed HSF-Type Floor Supports Available "X" "X" ADD 3/8" EACH END TO OAL FOR END CAPS 5'-0" LONG SECTIONS MAX OVERALL LENGTH "A" ALLOW 16" (2 HP) 18-1/2" (3 HP) 5'0" DRIVE SECTION ADD 3/8" EACH END TO OAL FOR END CAPS 7-1/4" OPTIONAL HSF SUPPORTS SHOWN "B" 15-9/16" (2 HP) 19-9/32" (3 HP) SECTION X-X 9" 3/8" 1-1/8" 5-11/32" 3-1/4" 5" X 6.7 LB. STRUCTURAL CHANNEL 1-3/4" BETWEEN RAIL WIDTH CONVEYING SURFACE MOTOR REDUCER DRIVE TOTALLLY ENCLOSED CHAIN GUARD 14-3/4" (2HP) 16" (3 HP) 7" X 9.8 LB STRUCTURAL CHANNEL OVERALL FRAME WIDTH 11-1/2" (2 HP) 13-1/4" (3 HP) 5" SIZE TO ORDER Overall Length "A" Conveying Surface 19 3/4" 21 3/4" 23 3/4" 27 3/4" 29 3/4" 33 3/4" 35 3/4" 41 3/4" 47 3/4" 53 3/4" 55 3/4" 63 3/4" Between Rail Width 23" 25" 27" 31" 33" 37" 39" 45" 51" 57" 59" 67" Overall Frame Width 26 27/32" 28 27/32" 30 27/32" 34 27/32" 36 27/32" 40 27/32" 42 27/32" 48 27/32" 54 27/32" 60 27/32" 62 27/32" 70 27/32" 10' 6" R/C 1284 1336 1387 1490 1541 1644 1695 1849 2003 2157 2208 2412 Per Foot 99 103 107 115 119 127 131 143 155 167 186 206 10' 12" R/C 1044 1076 1108 1172 1204 1268 1300 1396 1492 1588 1620 1748 Per Foot 75 78 81 87 90 96 99 108 117 126 129 141 All weights in catalog are conveyor weights only. Accessories, crating, etc., are not included. Roller Centers “B” 6” 22 3/4” 12” 25 3/4” Conveyor shown with optional floor supports CATALOG | 08312018 36-CRRH BED –Roller bed with 3 1/2 in. x .300 in. wall unplated tread rollers with 1 1/16 in. hex shaft spaced every 6 in. or 12 in. Mounted in 5 ft. long powder painted structural steel channel frame bolted together with butt couplings. CENTER DRIVE –Top side mounted drive, mounted to 5 ft. long section near center of conveyor. Chain guard located on left hand side. DRIVE CHAIN –No. 60 roller chain. CHAIN GUARD –Formed steel upper & lower chain guard mounted to top and bottom of channel frame to totally enclose drive chains. BEARINGS –Sealed, pre-lubricated ball bearings. SPEED REDUCTION –Heavy-duty sealed worm gear C-Face speed reducer. No. 80 roller chain to drive shaft. MOTOR –2 HP–230/460V–3 Ph. 60 Hz. Energy Efficient C-Face motor and AC Variable Speed controller with softstart capability. CONVEYING SPEED –Variable 3-30 FPM. CAPACITY –Maximum load per linear foot of conveyor 2000 lbs. with supports on 5 ft. centers. NOT TO EXCEED CAPACITY IN CHART. FLOOR SUPPORTS –Now supplied as optional equipment. • OPTIONAL EQUIPMENT FLOOR SUPPORTS –HSF Type floor supports are available with a wide range of adjustment. Specify top of belt or roller elevation. One support required at every bed joint and ends of conveyor. Holes in feet for lagging to floor. Knee braces recommended above HSF-6 support. CONVEYING SPEED –Other constant and variable speeds. NOTE : Capacity affected with speed change. Contact factory. MOTORS –3 HP maximum. ELECTRICAL CONTROLS –Push-button stations. • STANDARD SPECIFICATIONS LOAD CAPACITY CHART @ 30 FPM HP OVERALL FRAMEWIDTH OVERALL FRAMEWIDTH OVERALL FRAMEWIDTH 26 27/32" to 30 27/32" 34 27/32" to 42 27/32" 48 27/32" to 62 27/32" TOTAL LOAD (Lbs.) TOTAL LOAD (Lbs.) TOTAL LOAD (Lbs.) UP TO 30' UP TO 60' UP TO 90' UP TO 30' UP TO 60' UP TO 90' UP TO 30' UP TO 60' UP TO 90' 2 21000 19200 17400 20400 18000 15600 19400 16000 12500 3 27000 25200 23400 26400 24000 21600 25400 22000 18500 Note : Capacities based on Hytrol supplied chain.

RkJQdWJsaXNoZXIy NjQ0OTEy