Hytrol Catalog

CATALOG | 08312018 DC-62 CHAIN – #60 single pitch conveyor chain (straight sidebar). CHAIN GUIDE – UHMW polyethylene. FRAME – 6 in. x 7 ga. powder painted formed steel angle with 1 1/2 in. x 3/16 wall, chain support tube. 4 ga. formed coupling channels located at infeed and discharge ends of each module. MOTOR –1 1/2 HP – 208/230/460/575V– 3 PH. 60 HZ. gearmotor, located underneath in 5 ft. long module. DRIVE SPROCKETS – Hardened #60 with 1 3/8 in. dia. steel shaft. BEARINGS – Sealed, pre-lubricated, self aligning, ball bearings on drive. CONVEYING SPEED –35 FPM. CAPACITY –6000 lbs. maximum at 35 FPM (1 1/2 HP maximum). NOT TO EXCEED CAPACITY IN CHART. FLOOR SUPPORTS –Now supplied as optional equipment. • OPTIONAL EQUIPMENT FLOOR SUPPORTS –DCSandDCDSTypefloorsupportsareavailablewithawiderangeofadjustment. Specify top of chain elevation. One support required at every bed joint and ends of conveyor. Holes in feet for lagging to floor. MOTORS –1 1/2 HP maximum. CLOSED TAIL –Overall length will be affected. CONVEYING SPEED –Speeds other than 35 FPM will require gear box change (contact factory). • STANDARD SPECIFICATIONS NOTE : Product footprint may affect drive capacity. MAXIMUM UNIT LOAD–6000 lbs. LOAD CAPACITY CHART (Live)* @ 35 FPM HP TOTAL LOAD (Lbs.) UP TO 50’ UP TO 102’ 1 1/2 6000 6000

RkJQdWJsaXNoZXIy NjQ0OTEy