Hytrol Catalog

CATALOG | 08312018 26-CRR Chain Driven Live Roller Conveyor (Roll-to-Roll Type) The heavy design of the 26-CRR allows it to be used for conveying higher load capacities such as loaded pallets and drums. Chain driven rollers make it ideal for conveying oily parts in bottling and steel industries. • 15 BedWidths • Center Drive • Reversible • Chain Driven Rollers • Adjustable HSN-Type Floor Supports Available BETWEEN RAIL WIDTH CONVEYING SURFACE *SEE NOTE FRAME SPACER 1-5/8" LOWER CHAIN GUARD 5-7/8" 1-1/2" 20-1/8" 18-1/2" TOP OF ROLLERS 22-1/2" (5' SECTION) 52-1/2" (10' SECTION) 15-1/4" ALLOW 16" 12" "X" "X" "Y" "Y" OPTIONAL HSN SUPPORTS SHOWN 14-1/8" MAX. OVERALL LENGTH "A" 13" SECTION Y-Y OVERALL FRAME WIDTH UPPER CHAIN GUARD NO. 40A21, NO. 50A18, OR NO. 60A16 SPROCKETS 6" 3/8" 1-5/8" 4" 18-1/2" 14-1/8" 20-1/8" BETWEEN RAIL WIDTH CONVEYING SURFACE *SEE NOTE FRAME SPACER 1-7/8" LOWER CHAIN GUARD 6-1/8" 1-3/4" BETWEEN RAIL WIDTH CONVEYING SURFACE *SEE NOTE FRAME SPACER 1-7/8" LOWER CHAIN GUARD 6-1/8" 1-3/4" 4 in., 5 in., 6 in., and 7 1/2 in., Roller Centers. Conveying Surface 15 3/4" 17 3/4" 19 3/4" 21 3/4" 23 3/4" 27 3/4" 29 3/4" 33 3/4" 35 3/4" 39 3/4" 43 3/4" 47 3/4" 51 3/4" 57 3/4" 63 3/4" Between Rail Width 19" 21" 23" 25" 27" 31" 33" 37" 39" 43" 47" 51" 55" 61" 67" Overall FrameWidth 22 1/4" 24 1/4" 26 1/4" 28 1/4" 30 1/4" 34 1/4" 36 1/4" 40 1/4" 42 1/4" 46 1/4" 50 1/4" 54 1/4" 58 1/4" 64 1/4" 70 1/4" *4" Centers 10' Length-O.A. No. 40 Chain 808 845 882 919 956 1030 1067 1141 1178 1252 1326 1400 1474 1585 1696 Per Foot 73 77 81 85 89 97 101 109 113 121 129 137 145 157 169 5" Centers 10' Length-O.A. No. 50 Chain 707 742 777 812 847 917 952 1022 1057 1127 1197 1267 1337 1442 1547 Per Foot 65 69 73 77 81 89 93 101 105 113 121 129 137 149 161 6" Centers 10' Length-O.A. No. 60 Chain 639 673 707 741 775 843 877 945 979 1047 1115 1183 1251 1353 1455 Per Foot 59 62 65 68 71 77 80 86 89 95 101 107 113 122 131 7 1/2" Centers 10' Length-O.A. No. 60 Chain 572 605 638 671 704 770 803 869 902 968 1034 1100 1166 1265 1364 Per Foot 55 59 61 64 67 73 76 82 85 91 97 103 109 118 127 *#40 chain reduces total conveyor capacity. Consult factory. 3 in. Roller Centers. Conveying Surface 15 3/4" 17 3/4" 19 3/4" 21 3/4" 23 3/4" 27 3/4" 29 3/4" 33 3/4" 35 3/4" 39 3/4" 43 3/4" 47 3/4" 51 3/4" 57 3/4" 63 3/4" Between Rail Width 22 1/4" 24 1/4" 26 1/4" 28 1/4" 30 1/4" 34 1/4" 36 1/4" 40 1/4" 42 1/4" 46 1/4" 50 1/4" 54 1/4" 58 1/4" 64 1/4" 70 1/4" Overall FrameWidth 25 1/2" 27 1/2" 29 1/2" 31 1/2" 33 1/2" 37 1/2" 39 1/2" 43 1/2" 45 1/2" 49 1/2" 53 1/2" 57 1/2" 61 1/2" 67 1/2" 73 1/2" 3" Centers 10' Length-O.A. No. 60 Chain 976 1016 1056 1096 1136 1216 1256 1336 1376 1456 1536 1616 1696 1816 1936 Per Foot 87 90 93 96 99 103 108 114 117 123 129 135 141 150 159 3 3/4 in. Roller Centers. Conveying Surface 15 3/4" 17 3/4" 19 3/4" 21 3/4" 23 3/4" 27 3/4" 29 3/4" 33 3/4" 35 3/4" 39 3/4" 43 3/4" 47 3/4" 51 3/4" 57 3/4" 63 3/4" Between Rail Width 22" 24" 26" 28" 30" 34" 36" 40" 42" 46" 50" 54" 58" 64" 70" Overall FrameWidth 25 1/4" 27 1/4" 29 1/4" 31 1/4" 33 1/4" 37 1/4" 39 1/4" 43 1/4" 45 1/4" 49 1/4" 53 1/4" 57 1/4" 61 1/4" 67 1/4" 73 1/4" 3 3/4" Centers 10' Length-O.A. No. 60 Chain 839 879 919 959 999 1079 1119 1199 1239 1319 1399 1479 1559 1629 1799 Per Foot 78 81 84 87 90 96 99 105 108 114 120 126 132 141 150 All weights in catalog are conveyor weights only. Accessories, crating, etc. are not included Note : Add 1 3/8”to OAL for Chain Guard End Caps on 4”centers only. Note : Add 3”to OAL for Chain Guard End Caps on 3”roller centers only. Conveyor shown with optional floor supports * NOTE : 3 1/4”FOR 4”, 5”, 6”, and 71/2”CENTERS. 61/2”FOR 3 3/4”CENTERS ONLY. 3 1/4”ON BOTH SIDES FOR 3”CENTERS. CATALOG | 08312018 26-CRR BED –Roller bed with 2 5/8 in. dia. x 7 ga. unplated tread rollers spaced every 4 in. with No. 40 roller chain; 5 in. with No. 50 roller chain. No. 60 roller chain used on 3 in., 3 3/4 in., 6 in., and 7 1/2 in. roller centers only. Tread rollers mounted in 4 in. x 4 ga. powder painted formed steel channel on side opposite chain guard and 6 in. x 4 ga. powder painted formed steel channel on chain guard side. NOTE : 3 in. roller center tread rollers mounted in 4 in. channel each side. CENTER DRIVE –Can be placed in any section of conveyor length, specify. Chain guard located on left hand side. DRIVE CHAIN –No. 40, 50 or 60 roller chain. CHAIN GUARD –Formed steel, upper and lower chain guard mounted to top and bottom of channel frame to totally enclose drive chains. BEARINGS –Sealed, pre-lubricated ball bearings. SPEED REDUCTION –Sealed worm gear C-Face speed reducer. MOTOR –1 HP–208/230/460/575V–3 Ph. 60 Hz. Premium Energy Efficient C-Face. CONVEYING SPEED –Constant 30 FPM. CAPACITY –Maximum load per linear foot of conveyor 300 lbs. with supports on 10 ft. centers, 1000 lbs. with supports on 5 ft. centers. Contact factory for capacity of No. 40 chain, 4 in. roller centers. NOT TO EXCEED CAPACITY IN CHART. FLOOR SUPPORTS –Now supplied as optional equipment. • OPTIONAL EQUIPMENT FLOOR SUPPORTS –HSN Type floor supports are available with a wide range of adjustment. Specify top or roller elevation. One support required at every bed joint and ends of conveyor. Holes in feet for lagging to floor. Knee braces recommended above HSN-3 support. CONVEYING SPEED –Other constant and variable speeds.V-belt supplied on speeds under 12 FPM (1 HP). Note : Capacity affected with speed change. TOP SIDE MOUNTED DRIVE –Motor reducer unit mounted to side of conveyor with drive chain through top of chain guard. Specify clearances. Minimum elevation top of rollers 6 1/2 in. V-BELT DRIVE– V-belt supplied between motor and reducer. SHAFT MOUNTED DRIVE –Mounted to side of conveyor complete with torque arm. Minimum elevation to top of rollers is 6 1/2 in. O-RING DRIVE CHAIN –With sealed in lubricant (Recommended for applications that do not permit regular lubrication). FRAMES –4 in. X 5.4 lb. structural channel (welded). GUARD RAILS –Fixed angle (2 in. high x 1/4 in. steel) guard bolts to top flange of channel opposite chain guard. CHANNEL END STOP –6”x 8.2 lb. structural channel end stop. ROLLERS SET LOW –Tread rollers mounted in 6 in. x 4 ga. formed steel channel frame to form 1 5/8 in. high guard rails. Also available in 5 in. x 6.7 lbs. structural channel frame (welded). Specify. CHAIN CROSSOVER –Separate 3-roller section moves driving chain from one side of conveyor to other. Offset-style adds 12 in. to OAL of conveyor with No. 40 chain, 15 in. with No. 50 chain & 18 in. with No. 60 chain. TRANSFERS –Chain transfers available. See Accessory section. MOTORS –Single phase, brakemotor, other characteristics. 2 HP maximum. ELECTRICAL CONTROLS –Non-reversing magnetic starter – push- button stations. AC variable frequency drive. • STANDARD SPECIFICATIONS LOAD CAPACITY CHART @ 30 FPM TOTAL LOAD (Lbs.) HP UP TO 50' UP TO 100' 1 9000 6000 2 22000 18000 NOTE : Capacities are calculated on 5”Roller Centers with #50 Chain.

RkJQdWJsaXNoZXIy NjQ0OTEy