Hytrol Catalog

CATALOG | 08312018 25-RBM Horizontal Belt Conveyor (Roller Bed) The Model RBM is designed for merge applications. Roller bed design reduces belt friction and provides greater capacity. • 12 Belt Widths • Reversible • Moves Heavier Loads • Center Drive • System Ends • Pop-Out Roller • Adjustable MHS Type Floor Supports Available 12" 2-1/8" DIA. SNUB IDLER TAKE-UP 6" DIA. TAKE-UP PULLEY 8" DIA. DRIVE PULLEY 1.9" DIA. POP OUT ROLLER 3 1/4" DIA. TAIL PULLEY 1.9" DIA. RETURN IDLER OPTIONAL MS SUPPORT SHOWN 17-3/4" 21" 38-1/4" 10-3/4" 8" 62" 2-1/2" DIA. SNUB IDLER ALLOW 16" 12" BED LENGTH "L" OVERALL LENGTH "A" PREFERRED FLOW 2.5" DIA. TREAD ROLLER "X" "X" (ALLOW 65” WITH V-BELT DRIVE) 6-1/2" CHANNEL FRAME SPACER 1-1/2" TREAD ROLLER 3/8" 3-1/8" BELT WIDTH BETWEEN RAIL WIDTH OVERALL FRAME WIDTH 2-1/8" DIA. SNUB IDLER/ 1.9" RETURN IDLER TOTALLY ENCLOSED CHAIN GUARD OAL 12' OAW 22 24 26 28 30 34 36 40 42 48 54 60 3" R/C 791 837 884 930 977 1070 1117 1210 1257 1396 1536 1677 6" R/C 791 837 884 930 977 1070 1117 1210 1257 1396 1536 1677 All weights in catalog are CONVEYORWEIGHTS ONLY. Accessories, crating, etc., are not included. Conveyor shown with optional floor supports CATALOG | 08312018 BELT –Green 2-ply PVC cover with clipper lacing. BED –Roller bed with 2.5 in. dia. roller x 11 ga. unplated tube spaced every 3 in. Mounted in 6 1/2 in. x 12 ga. powder painted formed steel channel frame bolted together with splice plates. CROSS BRACING –Rods with turnbuckles are fastened to underside of bed to provide proper alignment of bed rollers and insure tracking. (1) supplied in first 50' of bed section lengths and (1) per 50' of bed section length thereafter. Supplied in approximate center of lengths. CENTER DRIVE –Minimum elevation–17 3/4 in. Can be placed on any section of conveyor length. Minimum OAL without modification 120 in. DRIVE PULLEY –8 in. dia. with 1 7/16 in. dia. shaft at bearings, fully lagged. TAIL PULLEY –3 1/4 in. dia. with 1 in. dia. shaft at bearings . SNUB IDLER –Adjustable 2 1/8 in. dia. pre-lubricated ball bearings. Guards included. RETURN IDLER –Adjustable 1.9 in. dia. pre-lubricated ball bearings. TAKE-UP –Take-ups in center drive provides 16 in. of belt take-up. BEARINGS –Sealed, pre-lubricated, self-aligning, ball bearings on drive and tail pulleys. Pre- lubricated ball bearings in tread rollers. SPEED REDUCTION –Sealed worm gear C-Face speed reducer. No. 50 roller chain to drive pulley. MOTOR –1 HP–208/230/460/575V–3 Ph.–60 Hz. Totally Enclosed C-Face. BELT SPEED –Constant 65 FPM. CAPACITY –Maximum load per linear foot of conveyor 225 lbs. NOT TO EXCEED capacity in charts. FLOOR SUPPORTS –Now supplied as optional equipment. 25-RBM FLOOR SUPPORTS –MHS Type floor supports are available with a wide range of adjustment. Specify top of belt or roller elevation. One support required at every bed joint and ends of conveyor. Holes in feet for lagging to floor. BELT* –Black ultimate 140 BBS,White Polymate 100 RMP-COS (cover one side), BlackTrackmate 533 COS-PVC, Tan Glidetop. BELT SPEED* –Other constant and variable speeds. V-belt drive supplied on speeds under 17 FPM. SHAFT MOUNTED CENTER DRIVE V-BELT DRIVE –V-Belt supplied between motor and reducer. Allow 65 in. O-RING DRIVE CHAIN –With sealed in lubricant (Recommended for applications that do not permit regular lubrication). GUARD RAILS –Adjustable Universal Channel Guard Rail, fixed channel, type A & B angle. Fixed Channel overlapping, one direction. Fixed Channel nonoverlapping, reversing. See Accessory section. ROLLER CENTERS* –Tread rollers spaced on 6 in. centers. PULLEYS –6 in. dia. tail with 1 3/16 in. dia. shaft at bearings in place of 3 1/4 in. when not furnished as standard. POLY-TIER SUPPORTS –36 in. to 120 in. support heights in 6 in. increments. Knee braces supplied. CEILING HANGERS –5/8 in. dia. x 8 ft. long unplated rods fully threaded. Other lengths and galvanized rods available. MOTORS –Energy efficient, single phase, brake motors, other characteristics. 2 HP maximum. ELECTRICAL CONTROLS –Non-reversing or reversible magnetic starter, and push-button stations. AC variable frequency drive. * NOTE : Capacity affected with these options. • OPTIONAL EQUIPMENT 8" DIA. DRIVE PULLEY HORIZONTAL LIVE LOAD CAPACITY @ 65 FPM HP BELT WIDTHS TO LENGTHS UP TO 52' 102' DISTRIBUTED LOAD (LBS.) 1 18" 24" 36" 48" 54" 5500 5290 4870 4530 4000 5160 4810 4180 3630 3200 2 18" 24" 36" 48" 54" 11520 11320 10890 10550 10000 11170 10830 10200 9650 9200 • STANDARD SPECIFICATIONS

RkJQdWJsaXNoZXIy NjQ0OTEy