Hytrol Catalog

CATALOG | 08312018 STRAND CENTERS EFFECTIVE OAL 1-1/2" 1-1/2" 1-3/4" 5-1/2" CONVEYING SURFACE OAW "A" GEARMOTOR 3-1/2" DIA ROLLER #C-2060-H CHAIN FROM DRAG CHAIN CONVEYOR 10" Nominal The 35 Roller Transfer is mounted in a Model DC-60 or DCEZ-60 and is used to transfer product from one DC-60 to another DC-60. The 35 Roller Transfer uses 3 1/2” dia x 9 ga. rollers mounted on 6” centers. Air bags lift the transfer mechanism. The 35 Roller Transfer uses a 1/3 HP gearmotor to provide constant 30 FPM. 35 ROLLER TRANSFER STRAND CENTERS EFFECTIVE OAL 1-1/2" 1-1/2" 1-3/4" 5-1/2" CONVEYING SURFACE OAW "A" GEARMOTOR 3-1/2" DIA ROLLER #C-2060-H CHAIN FROM DRAG CHAIN CONVEYOR 10" Nominal NOTE:  Extended Type & onveyor to Conveyor Type available, contact factory. MAXIMUM LOAD 3000 LBS. AT 30 FPM The 26 CRPT is used to rotate products up to 360 degrees. The turntable is powered by a shaft mounted gearmotor complete with variable speed controller for soft start/stop and has proximity switches mounted on the base to sense position and control rotation of product. Turntable speed is 3 Revolutions per minute with a 1 HP 460/3/60 gearmotor. An 8-wire collector ring allows unlimited rotation of turntable. Powered transition rollers, mounted on apron of turntable deck, help move product onto and off of turntable. The 26 CRR section has a Side Mounted Drive contained within the turning radius of the turntable. Standard speed is 30 FPMwith 1/2 HP 460/3/60 gearmotor. The tread rollers are 2 5/8 in. diameter with 7 gauge wall on 4 in. roller centers and have 2 5/8 in. dia. x .219 wall drive rollers with heavy duty bearings. Also available; gravity transition rollers; external transition roller sections (mounted to mating conveyors to fill in gap created by radius of turntable). Minimum Elevation - 16 inches. 26-CRPT POWER ROTATED TURNTABLE SIDE MOUNTED DRIVE GEARMOTOR OAL "A" POWERED TRANSITION ROLLERS OAW BR CS SIDE MOUNTED DRIVE GEARMOTOR OAL "A" POWERED TRANSITION ROLLERS 16"MIN. OAW BR CS All weights in catalog are conveyor weights only. Accessories, crating, etc. are not included MAXIMUM LOAD 4000 LBS. Shown with Optional 2-Strand Drag Chain. See DC-60 or DCEZ-60 for Drag Chain Specifications. OAL OAW BR CS WEIGHT Available in 44” 48” 52” 56” 60” Only 44 1/4” 41” 37 3/4” 1990 46 1/4” 43” 39 3/4” 2108 48 1/4” 45” 41 3/4” 2226 50 1/4” 47” 43 3/4” 2344 52 1/4” 49” 45 3/4” 2462 54 1/4” 51” 47 3/4” 2580 56 1/4” 53” 49 3/4” 2690 58 1/4” 55” 51 3/4” 2816 60 1/4” 57” 53 3/4” 2934 62 1/4” 59” 55 3/4” 3052 64 1/4” 61” 57 3/4” 3170 66 1/4” 63” 59 3/4” 3288 68 1/4” 65” 61 3/4” 3406 70 1/4” 67” 63 3/4” 3524 OAW CONVEYING SURFACE DIM“A” 41” 33 3/4” 51” 44” 36 3/4” 54” 47” 39 3/4” 57” 50” 42 3/4” 60” 53” 45 3/4” 63” 56” 48 3/4” 66” 59” 51 3/4” 69” 62” 54 3/4” 72” 65” 57 3/4” 75” 68” 60 3/4” 78” 71” 63 3/4” 81” 74” 66 3/4” 84” EFFECTIVE OAL STRAND CENTERS 42” 18” 48” 24” 54” 30” 60” 36” 66” 42” 72” 48” SYSTEMS ACCESSORIES

RkJQdWJsaXNoZXIy NjQ0OTEy