Hytrol Catalog

CATALOG | 08312018 199-PVR Poly-V Belt Driven Live Roller Conveyor The Model 199-PVR is a medium-duty poly-v belt driven live roller conveyor. The roll-to-roll belt drive makes this conveyor ideal for light duty pallet handling where little maintenance or a quieter conveyor is desirable. • 11 BedWidths • Shaft Mounted Drive • Reversible • Poly-V Belt Driven Rollers • Adjustable MSN-Type Floor Supports Available Conveyor shown with optional floor supports 3 1/2 1/4 OVERALL FRAME WIDTH BETWEEN RAIL WIDTH CONVEYING SURFACE 29/32 4 1/2 OVERALL LENGTH Optional MSN floor supports shown Conveying Surface 12 1/4" 14 1/4" 16 1/4" 18 1/4" 20 1/4" 22 1/4" 24 1/4" 28 1/4" 30 1/4" 34 1/4" 36 1/4" Between Rail Width 15" 17" 19" 21" 23" 25" 27" 31" 33" 37" 39" Overall FrameWidth 18" 20" 22" 24" 26" 28" 30" 34" 36" 40" 42" 3" Centers 10' Length-O.A. 705 740 765 790 825 850 885 935 970 1010 1055 Per Foot 56 59 61 63 66 68 71 75 78 81 85 4" Centers 10' Length-O.A. 655 680 705 730 755 780 805 855 870 920 955 Per Foot 51 53 55 57 59 61 63 67 69 72 75 6" Centers 10' Length-O.A. 605 620 645 670 685 710 725 775 780 830 855 Per Foot 46 47 49 51 52 54 55 59 60 63 65 • All weights in catalog are conveyor weights only. Accessories, crating, etc. are not included • Motors will slave a maximum of 40 rollers, 20 rollers per side. CATALOG | 08312018 199-PVR BED –Roller bed with 1.9 in. x 9 ga. wall unplated tread rollers spaced every 3 in, 4 in, or 6 in mounted in 7 ga. powder painted formed steel channel frame bolted together with butt couplings. SHAFT MOUNTED DRIVE –Shaft mounted gearmotor to the side of the bed section. POLY-V BELT –4-rib J-Profile roller to roller GUARD –Mounted to top of channel frame to totally enclose drive belts. BEARINGS –Sealed, pre-lubricated ball bearings on drive roller shaft. MOTOR –1/2 HP–208/230/460/575V–3 Ph. 60 Hz. Gearmotor. CONVEYING SPEED –Constant 35 FPM. CAPACITY –Maximum load per linear foot of conveyor 150 lbs with supports on 10’centers, 250 lbs with supports on 5’centers. 600 lbs total load. FLOOR SUPPORTS –Now supplied as optional equipment. CONVEYOR LENGTH –Maximum 10’per drive. • OPTIONAL EQUIPMENT FLOOR SUPPORTS –MSN Type floor supports are available with a wide range of adjustment. Specify top of belt or roller elevation. One support required at every bed joint and ends of conveyor. Holes in feet for lagging to floor. Knee braces recommended above MSN-6 support. CONVEYING SPEED –Other constant and variable speeds. NOTE : Capacity affected with speed change. GUARD RAILS –Adjustable Universal Channel Guard Rail, (both sides) fixed channel (both sides) or angle (one side). See Accessory section . POLY-TIER SUPPORTS –36 in. to 120 in. support heights in 6 in. increments. Knee braces supplied. CEILING HANGERS –5/8 in. dia. x 8 ft. long unplated rods fully threaded. Other lengths and galvanized rods available. MOTORS –Other HP gearmotors available. ELECTRICAL CONTROLS –Non-reversing magnetic starters and push-button stations. AC variable frequency drive. TRANSFERS –Chain transfers available. See accessories. GUARD REMOVED TO ILLUSTRATE ROLL TO ROLL DRIVE BELT. WARNING: DO NOT OPERATE CONVEYOR WITH GUARD REMOVED. • STANDARD SPECIFICATIONS

RkJQdWJsaXNoZXIy NjQ0OTEy