Hytrol Catalog

CATALOG | 08312018 199-CRRC Chain Driven Live Roller Curve Conveyor The 199-CRRC is a chain driven live roller curve that aids in alignment of packages, cartons, etc., through 30°, 45 °, 60° and 90° curves. Can be used in conveying oily parts. • 11 BedWidths • Reversible • Tapered Tread Rollers • Can Be Slave-driven from 199-CRR • Adjustable MSN-Type Floor Supports Available Conveyor shown with optional floor supports RIGHT HAND WITH DISCHARGE TANGENT LEFT HAND WITH DISCHARGE TANGENT NOTE: SPECIFY RH OR LH CURVE LEFT HAND WITH INFEED TANGENT RIGHT HAND WITH INFEED TANGENT NOTE: SPECIFY RH OR LH CURVE ROLLER BED 48" TANGENT OPTIONAL MSN SUPPORT SHOWN "R" 90˚ "Y" "Y" "R" 45˚ "X" "X" "Y" "Y" "R" 30˚ "X" "X" "Y" "Y" ALLOW 16" 13-3/4" MAX. 48" NO. 40A18 SPROCKETS ALLOW 16" 13-3/4" MAX. 48" ALLOW 16" 13-3/4" MAX. 48" 3-1/2" 1/4" 17" 90˚ CURVE HAS TAPERED ROLLER HERE OVERALL FRAME WIDTH 13-3/16" 4-3/4" 13/16" 2-3/4" BETWEEN RAIL WIDTH CONVEYING SURFACE TOTALLY ENCLOSED CHAIN GUARD 2-3/4" 1-3/8" TAPERED TREAD ROLLERS 3-3/4" FRAME SPACER SECTION Y-Y Conveying Surface Between Rail Width Overall Frame Width "R" Number of Rollers* WEIGHTS (Lbs.) 90º 60º 45º 30º 90º 60º 45º 30º 12 1/4" 15" 18" 32 1/2" 14T 10T 6T 4T 390 312 297 282 14 1/4" 17" 20" 400 320 305 290 16 1/4" 19" 22" 410 328 313 298 18 1/4" 21" 24" 420 336 321 306 20 1/4" 23" 26" 430 344 329 314 22 1/4" 25" 28" 440 352 337 322 24 1/4" 27" 30" 450 360 345 330 28 1/4" 31" 34" 48" 20T 16T 10T 6T 480 390 375 365 30 1/4" 33" 36" 560 398 383 373 34 1/4" 37" 40" 530 414 399 389 36 1/4" 39" 42" 540 432 407 397 All weights in catalog are conveyor weights only. Accessories, crating, etc., are not included. SECTION X-X CATALOG | 08312018 199-CRRC BED –Roller bed with 2 1/2 in. dia. tapered to 1 11/16 in. dia. x 14 ga. unplated rollers mounted in 10 ga. powder painted formed steel channel frame. CENTER DRIVE –Located on 4’-0”long straight section. ROLLER CHAIN –No. 40 circular roller-to-roller chain. MOTOR DRIVE CHAIN –No. 60 chain. CHAIN GUARD –Mounted to top of channel frame to totally enclose drive chain. BEARINGS –Sealed, pre-lubricated ball bearings. BUTT COUPLINGS –Standard for connecting to 199-CRR. SPEED REDUCTION –Sealed worm gear C-Face speed reducer. MOTOR –1/2 HP–208/230/460/575V–3 Ph. 60 Hz. Totally Enclosed C-Face. CONVEYING SPEED –Constant 35 FPM. CAPACITY –850 lbs. total distributed live load. FLOOR SUPPORTS –Now supplied as optional equipment. • OPTIONAL EQUIPMENT FLOOR SUPPORTS –MSN Type floor supports are available with a wide range of adjustment. Specify top of belt or roller elevation. One support required at every bed joint and ends of conveyor. Holes in feet for lagging to floor. Knee braces recommended above MSN-6 support. CONVEYING SPEED –Other constant and variable speeds. NOTE : Capacity affected with speed change. SHAFT MOUNTED DRIVE –Requires shaft mounted gearmotor. Minimum elevation top of rollers 6 in. O-RING DRIVE CHAIN –With sealed in lubricant (Recommended for applications that do not permit regular lubrication). ROLLERS SET LOW –Tread rollers mounted in 4 3/4 in. x 10 ga. formed steel channel frame to form 1 in. high guard rails. GUARD RAILS –Adjustable Universal Channel Guard Rail (both sides), fixed channel (both sides) or angle (one side). See Accessory section POLY-TIER SUPPORTS –36 in. to 120 in. support heights in 6 in. increments. Knee braces required. CEILING HANGERS –5/8 in. dia. x 8 ft. long unplated steel rods. Other lengths and galvanized rods available. MOTORS –Energy efficient, single phase, brakemotor, other characteristics. 1 HP maximum. ELECTRICAL CONTROLS –Non-reversing or reversible magnetic starters and push-button stations. AC variable frequency drive. • STANDARD SPECIFICATIONS

RkJQdWJsaXNoZXIy NjQ0OTEy