Hytrol Catalog

CATALOG | 07222019 NBLR • STANDARD SPECIFICATIONS BED —Roller bed with 1.9 in. dia. Rollers x 16 ga. Galvanized tube spaced every 3 in. Mounted in 8-1/2 in. x 12 ga. Powder painted formed steel channel frame bolted with ABEC-1 bearings and with butt couplings. BELT —45MM wide polyurethane thermoplastic with aramid cords. CENTER DRIVE —Can be placed on any section of conveyor 9'-0" or longer with Spring take-up in center drive provides 32 in. of belt take-up. SET LOW CHANNEL – 8-1/2" deep "C" Channel. CAPACITY —Maximum load per 35 lbs/ft. PRESSURE FRAME CARRIAGE —Contains two Delrin rollers to provide positive drive to four tread rollers through the length of unit. FLOOR SUPPORTS –MS Type floor supports are available with a wide range of adjustment. Specify top of belt or roller elevation. One support required at every bed joint and ends of conveyor. Holes in feet for lagging to floor. Knee braces recommended above MS-6 support. GUARD RAILS –Adjustable Universal Channel Guard Rail. See Accessory section. Note : If product comes into contact with Guard Rails, product flow will be affected. Fixed channel overlapping- one direction. POLY-TIER SUPPORTS –36 in. to 120 in. support heights in 6 in. increments. Knee braces required. CEILING HANGERS –5/8 in. dia. x 8 ft. long unplated steel rods fully threaded. Other lengths and galvanized rods available. ELECTRICAL MOTOR CONTROLS –Non-reversing magnetic starters and push-button stations. AC variable frequency drive. BELT SPLICE KIT - Includes press, finger cutter and guide rail. • OPTIONAL EQUIPMENT