Hytrol Catalog

CATALOG | 08312018 190-NSPC The 190 Spool Curves and Spurs are designed to be slave driven from the 190-NSP Conveyor. Curves are used where turns in the conveyor line are necessary. Spurs are used in diverging and converging applications. • 12 BedWidths • Slave Driven from Model 190-NSP • Adjustable MS-Type Floor Supports Available DRIVE SHAFT 6-1/4" "R" 60˚ SHAFT COUPLING "U" JOINT 6-1/4" "X" "X" "X" "X" "R" DRIVE SHAFT 90˚ SHAFT COUPLING "U" JOINT 6-1/4" 6-1/4" "R" DRIVE SHAFT 45˚ SHAFT COUPLING 18" 30˚ DRIVE SHAFT "U" JOINT 18" "R" SHAFT COUPLING 18" "X" "X" "U" JOINT "X" "X" 18" DRIVE DRIVE RIGHT HAND LEFT HAND TANGENT LENGTH 30˚, 45˚, 60˚, OR 90˚ 24" • CURVE WITH OPTIONAL DRIVE SPECIFY RH OR LH NOTE: DARK SHAFT INDICATES POSITIVE DRIVE SPOOLS. Between Rail Width Overall Frame Width "R" Total Number of Rollers* WEIGHTS (Lbs.) 90º 60º 45º 30º 90º 60º 45º 30º 13" 16" 24" 16T/4S 10T/4S 8T/12S 5T/12S 179 144 157 132 15" 18" 32 1/2" 20T/4S 12T/4S 10T/12S 6T/12S 222 184 183 151 17" 20" 235 197 192 158 19" 22" 248 209 202 165 21" 24" 259 224 211 173 23" 26" 281 233 222 181 25" 28" 285 246 231 189 27" 30" 299 258 241 199 31" 34" 48" 28T/4S 20T/4S 14T/12S 10T/12S 437 338 313 247 33" 36" 452 353 326 259 37" 40" 484 380 349 271 39" 42" 503 395 361 285 *T = TAPERED S = STRAIGHT All weights in catalog are conveyor weights only. Accessories, crating, etc., are not included. 190-NSPS Between Rail Width Overall Frame Width "R" "A" "B" "C" "D" "E" Number of Rollers* WEIGHTS (Lbs.) 45º 30º 45º 30º 45º 30º 45º 30º 45º 30º 45º 30º 45º 30º 13" 16" 24" 29" 38" 27" 36" 21" 30" 21 7/8" 38" 50" 42 1/4" 8T/12S 10T/11S 173 176 15" 18" 32 1/2" 32" 41" 30" 39" 36" 54" 35" 63" 66 5/8" 61 5/8" 10T/17S 12T/19S 230 263 17" 20" 35" 47" 33" 45" 240 274 19" 22" 38" 50" 36" 48" 250 283 21" 24" 41" 53" 39" 51" 259 293 23" 26" 44" 56" 42" 54" 268 303 25" 28" 47" 62" 45" 60" 280 316 27" 30" 50" 65" 48" 63" 288 325 31" 34" 48" 56" 74" 54" 72" 48" 75" 48" 89" 86" 85 1/2" 14T/21S 20T/26S 410 499 33" 36" 59" 77" 57" 75" 422 513 37" 40" 65" 86" 63" 84" 446 540 39" 42" 68" 89" 66" 87" 457 553 *T = TAPERED S = STRAIGHT All weights in catalog are conveyor weights only. Accessories, crating, etc., are not included. "A" "B" "A" "B" 45˚ 60˚ 45˚ 30˚ "C" "C" "E" "E" "D" "D" "R" "R" "X" "X" "X" "X" DRIVE SHAFT SHAFT COUPLING SHAFT COUPLING "U" JOINT 6-1/4" "U" JOINT DRIVE SHAFT DRIVE GUARD SHAFT COUPLING OVERALL FRAME WIDTH BETWEEN RAIL WIDTH DRIVE O-RING 1-1/2" 1/4" 4-1/2" 18" NOTE: DARK SHAFT INDICATES POSITIVE DRIVE SPOOLS. SECTION “X-X” DRIVE SPOOL DRIVE O-RING 1-1/2" 1/4" 9-1/2" OVERALL FRAME WIDTH BETWEEN RAIL WIDTH DRIVE GUARD RIGHT HAND LEFT HAND CATALOG | 08312018 • STANDARD SPECIFICATIONS BED –Roller bed with 2 1/2 in. dia. tapered to 1 11/16 in. dia. x 14 ga. galvanized and 1.9 in. dia. roller x 16 ga. galvanized tube. Mounted in 9 1/2 in. x 12 ga. powder painted formed steel channel frame. SLAVE DRIVEN –Curves and spurs are slave driven from drive shaft of Model 190-NSP conveyor. Shafts are coupled by chain coupling at bed joints. DRIVE SHAFT –1 in. dia. steel shaft extends full length of conveyor, coupled with universal joints (U joints) at necessary intervals. DRIVE SPOOLS –2 in. dia. Delrin spool held in place on drive shaft with spool spacers. DRIVE GUARD –Underside of drive shaft with spools and drive o-rings guarded full length of conveyor. DRIVE O-RING –3/16 in. dia. polyurethane o-ring from drive spool to tread roller. BEARINGS –Sealed, pre-lubricated, self-aligning, ball bearings with eccentric lock collar on drive shaft. Pre-lubricated ball bearings in tread rollers. SPLICE PLATES –Standard for connecting to 190-NSP. CAPACITY –See Load Capacity Chart. FLOOR SUPPORTS –Now supplied as optional equipment. • OPTIONAL EQUIPMENT FLOOR SUPPORTS –MS Type floor supports are available with a wide range of adjustment. Specify top of belt or roller elevation. One support required at every bed joint and ends of conveyor. Holes in feet for lagging to floor. Knee braces recommended above MS-6 support. CONVEYING SPEED –Other constant and variable speeds from 30 to 120 FPM. Over 120 FPM timing belt drive recommended. Capacity affected with speed change. DRIVE –24 in. long drive section replaces standard 6 1/4 in. or 18 in. tangent on end of 190-NSPC or 190-NSPS. No change on 190-NSPSS. Specify RH or LH. GUARD RAILS –Adjustable Universal Channel Guard Rail, fixed channel or type A or B angle. Note : If product comes in contact with guard rails, product flow will be affected. POLY-TIER SUPPORTS –36 in. to 120 in. support heights in 6 in. increments. Knee braces supplied. CEILING HANGERS –5/8 in. dia. x 8 ft. long unplated rods fully threaded. Other lengths and galvanized rods available. OPTIONAL TANGENTS –Available in 3 in. increments up thru 48 in. long. 190-NSPSS "X" "X" "X" SHAFT COUPLING 49-11/16' DRIVE SHAFT 85-3/4" 99" "B" "A" 55-11/32" 78" "A" "B" 55-5/32" "X" DRIVE SPOOL LOCK COLLAR DRIVE O-RING 1-1/2" DRIVE GUARD 1/4" 9-1/2" OVERALL FRAME WIDTH BETWEEN RAIL WIDTH DRIVE GUARD SECTION “X-X” RIGHT HAND LEFT HAND NOTE: DARK SHAFT INDICATES POSITIVE DRIVE SPOOLS. Between Rail Width Overall Frame Width "A" "B" WEIGHTS (Lbs.) 45º 30º 45º 30º 45º 30º 13" 16" 29" 38" 27" 36" 177 224 15" 18" 32" 41" 30" 39" 184 233 17" 20" 35" 47" 33" 45" 191 241 19" 22" 38" 50" 36" 48" 198 249 21" 24" 41" 53" 39" 51" 204 256 23" 26" 44" 56" 42" 54" 210 262 25" 28" 47" 62" 45" 60" 219 272 27" 30" 50" 65" 48" 63" 225 278 31" 34" 56" 74" 54" 72" 237 290 33" 36" 59" 77" 57" 75" 242 296 37" 40" 65" 86" 63" 84" 253 306 39" 42" 68" 89" 66" 87" 256 310 All weights in catalog are conveyor weights only. Accessories, crating, etc., are not included. LOAD CAPACITY CHART Overall Frame Width 190-NSPC 190-NSPS 190-NSPSS Capacity Per Curve (Lbs.) Capacity Per Spur (Lbs.) Capacity Per St. Spur (Lbs.) 45º 30º 45º 30º 16" 240 300 285 375 480 18" to 30" 300 405 435 34" to 42" 450 540 720

RkJQdWJsaXNoZXIy NjQ0OTEy