Hytrol Catalog

CATALOG | 08312018 Live Roller Spur Conveyor 190-LRS Conveyor shown with optional floor supports • 12 BedWidths • Reversible • Right or Left Hand Units Available • Adjustable MS-Type Floor Supports Available The Model 190-LRS Live Roller Spur is used in diverging or converging applications. It may be self-powered or can be slave driven from 190-ACC, LRC, or LRSS conveyors. "X" "X" 4" "D" "R" 13" 18" 12-1/4" "E" "Y" "Y" 45˚ "C" "A" "B" 45˚ IDLER SHEAVE (FLAT TYPE) TAKE-UP SHEAVE ("V" TYPE) "X" "X" 4" "R" "D" 13" 12-1/4" "E" "Y" "Y" "C" "A" "B" 30˚ 6-1/4" 60˚ END GUARD ROLLER BED BELT TAKE-UP 18-3/8" MOUNTING BRACKET OPTIONAL MS SUPPORT SHOWN TOTALLY ENCLOSED CHAIN GUARD DRIVING V-BELT SHEAVE OVERALL FRAME WIDTH END GUARD 10-5/16" SECTION “X-X” 1/4" 1-1/2" 6-1/2" V-BELT TAKE-UP PRESSURE SHEAVE 10-1/8" TREAD ROLLER OVERALL FRAME WIDTH BETWEEN RAIL WIDTH SECTION “Y-Y” Between Rail Width Overall Frame Width "R" "A" "B" "C" "D" "E" Number of Rollers* WEIGHTS (Lbs.) 45º 30º 45º 30º 45º 30º 45º 30º 45º 30º 45º 30º 45º 30º 13" 16" 24" 29" 38" 27" 36" 21" 30" 21 7/8" 38" 50" 42 7/32" 13S/8T 12S/10T 195 206 15" 18" 32 1/2" 32" 41" 30" 39" 36" 54" 34 31/32" 63" 66 5/8" 61 19/32" 18S/10T 20S/14T 224 245 17" 20" 35" 47" 33" 45" 233 255 19" 22" 38" 50" 36" 48" 241 264 21" 24" 41" 53" 39" 51" 250 270 23" 26" 44" 56" 42" 54" 262 287 25" 28" 47" 62" 45" 60" 276 299 27" 30" 50" 65" 48" 63" 282 311 31" 34" 48" 56" 74" 54" 72" 48" 75" 48" 88 31/32" 86 1/16" 85 1/2" 22S/14T 27S/22T 322 380 33" 36" 59" 77" 57" 75" 329 390 37" 40" 65" 86" 63" 84" 340 406 39" 42" 68" 89" 66" 87" 351 416 *T = TAPERED S = STRAIGHT All weights in catalog are conveyor weights only. Accessories, crating, etc., are not included. CATALOG | 08312018 190-LRS BED –Roller bed with 2 1/2 in. dia. tapered to 1 11/16 in. dia. roller x 14 ga. galvanized and 1.9 in. dia. roller x 16 ga. galvanized tube. Mounted in 6 1/2 in. x 12 ga. powder painted formed steel channel frame. END DRIVE –Mounted underneath bed section on outside radius. DRIVING BELT –Endless B-section V-Belt, industrial grade. PRESSURE SHEAVES –2 1/2in. dia. with 3/8 in. bore. IDLER SHEAVE –4 in. dia. x 5/8 in. bore V type or 5 1/2 in. dia. x 5/8 in. bore flat type. TAKE-UP –Take-ups provided to maintain proper V-belt tension. Includes 4 3/8 in. dia. x 5/8 in. V type take-up sheave. BEARINGS –Tread rollers have pre-lubricated ball bearings. Flange and pillow block bearings are sealed, pre-lubricated with eccentric lock collar. MOUNTING BRACKET –Bracket is supplied to attach spur to side channels of 190-ACC, 190-ACZ, or 190-LR conveyors. BUTT COUPLINGS –Standard for connecting 190-ACC, 190-LRC, 190-ACZ, or 190-LR conveyors. SPEED REDUCTION –Sealed worm gear reducer driven by V-belt. No. 50 roller chain to drive sheave. MOTOR –1/2 HP–208/230/460/575V–3 PH. 60 Hz. Totally Enclosed. CONVEYING SPEED –Constant 65 FPM. CAPACITY –500 lbs. total distributed live load. FLOOR SUPPORTS –Now supplied as optional equipment. • OPTIONAL EQUIPMENT FLOOR SUPPORTS –MS Type floor supports are available with a wide range of adjustment. Specify top of belt or roller elevation. One support required at every bed joint and ends of conveyor. Holes in feet for lagging to floor. Knee braces recommended above MS-6 support. CONVEYING SPEED –Other constant and variable speeds from 25 to 120 FPM. NOTE : Capacity affected with speed change. END DRIVE –Mounted on inside radius. Minimum elevation 18 7/8”. SIDE MOUNTED DRIVE –Motor reducer unit mounted to side of conveyor. Minimum elevation–11 1/16 in. O-RING DRIVE CHAIN –With sealed in lubricant (Recommended for applications that do not permit regular lubrication). GUARD RAILS –Adjustable Universal Channel Guard Rail, fixed channel, type A & B angle. (See Accessory section.) NOTE : If product comes in contact with guard rails, product flow will be affected. POLY-TIER SUPPORTS –36 in. to 120 in. support heights in 6 in. increments . Knee braces supplied. CEILING HANGERS –5/8 in. dia. x 8 ft. long unplated rods fully threaded. Other lengths and galvanized rods available. SLAVE DRIVEN –Standard drive may be omitted and curve slave driven from 190-ACC, 190-ACZ, or 190-LR conveyors. (Specify by sketch, location of slave connection). Minimum elevation 11 in. MOTORS –Energy efficient, single phase, brakemotor, other characteristics. 1 HP maximum. ELECTRICAL CONTROLS –Non-reversing or reversible magnetic starters and push-button stations. AC variable frequency drive. RH LH PRODUCT FLOW PLOW OR DEFLECTOR 30˚ PRODUCT FLOW CORNER TURNING WHEEL 30˚ or 45˚ MOUNTING BRACKET CONVEYOR SIDE CHANNEL SPUR CURVE CHANNEL Live Roller Spurs are used to transfer cartons, etc., onto and off of main conveyor lines. The illustrations below show the correct usage of Plows and TurningWheels with Spurs in Diverging and Converging applications. • SPUR APPLICATIONS DIVERGING 30° most desirable transfer angle CONVERGING Both 30° and 45° are desirable transfer angles MOUNTING BRACKET The 190-LRS is equipped with mounting brackets to attach unit to side channel of 190-ACC, 190-ACZ, or 190-LR. SPUR FLOW (Specify) • STANDARD SPECIFICATIONS

RkJQdWJsaXNoZXIy NjQ0OTEy