Hytrol Catalog

CATALOG | 08312018 SECTION "X"-"X" "X" "X" OVERALL LENGTH SECTION LENGTH OVERALL FRAME WIDTH BETWEEN RAIL WIDTH 6 1/2" 1/4" E24i MOTOR TREAD ROLLER E24i MOTOR 8 5/32" 16" OPTIONAL "MS" SUPPORT SHOWN POWER SUPPLY 2" 2" 1 1/2" 190-E24 24 VDC Live Roller The model 190-E24 24 VDC Live Roller Conveyor uses a series of 24 VDC motors to drive the tread rollers, eliminating the need for drive belts, chains, or line shafts. Quiet operation and ease of maintenance and installation are just some of the advantages. • All-Electric Operation • Adjustable MS-Type Floor Supports Available 190-E24C 24 VDC Live Roller Curve Conveyor • All-Electric Operation • Adjustable MS-Type Floor Supports Available Between Rail Width Overall Frame Width "R" Number of Rollers 90º & 60º WEIGHTS (Lbs.) 45º & 30º WEIGHTS (Lbs.) 9" 12" 24" 16 160 88 11" 14" 180 99 13" 16" 200 110 15” 18” 32 1/2" 20 220 121 17" 20" 240 132 19" 22" 260 143 21" 24" 280 154 23" 26" 300 165 25" 28" 310 171 27" 30" 325 178 31" 34" 48" 30 495 274 33" 36" 520 286 37" 40" 565 311 39" 42" 590 325 9" BR has an outside mounted motor and uses Hytrol's 3.0 card. All weights in catalog are conveyor weights only. Accessories, crating, etc., are not included. Section Length Between Rail Width 9” 11” 13” 15” 17" 19" 21" 23" 25" 27" 31" 33" 37" 39" Overall Frame Width 12” 14” 16” 18” 20" 22" 24" 26" 28" 30" 34" 36" 40" 42" 10'-0" Weights (lbs.) 285 300 310 325 340 355 370 385 400 410 435 450 480 495 Per Foot Weights (lbs.) 16 17 19 20 21 23 24 26 27 28 31 32 35 36 NOTE : • Section Lengths are available from 2 ft. to 10 ft, in 6 in. increments. • Motors are mounted on various centers, and will slave a maximum of 16 rollers. Includes: motor, control board, o-rings, frame and slaved rollers. 190-E24 and 190-E24C shown together. CATALOG | 08312018 190-E24 BED (E24) —Roller bed with 1.9 in. dia. roller x 16 ga. galvanized tube and bearings spaced every 3 in. Mounted set-high in 6 1/2 in x 12 ga. powder painted formed steel channel frame bolted together with splice plates. BED (E24C) —Roller bedwith 21/2 in. dia tapered to 1 11/16 in. dia. x 14 ga. galvanized rollers. Mounted in 6 1/2 x 12 ga. powder painted formed steel channel frame. MOTOR —24VDC motor with integrated control card located along section on the inside of the BR on straight section only. Maximum slaved rollers is 16 per each motor. SLAVE O-RINGS —3/16in. dia. polyurethane o-rings slave-drive tread rollers from motor. POWER SUPPLY (FOR MOTORS) —40 amp DC power supply, 24 volt fixed output. Maximum of 40 motors per power supply. 120 vac, 8.6 amp input. Mounted near center of conveyor. Note : Number of motors per power supply is based on the use of standard Hytrol o-rings. Other o-rings are available that may increase load capacity, but reduce the number of motors that may be powered from one power supply. Contact factory for more information. CONVEYING SPEED —25-254 FPM, set on integrated motor control card. CAPACITY —Maximum 37 lbs. per foot with a maximum capacity per E24 motor of 75 lbs. If loading product“back to back”use the following chart: SECTION LENGTH NUMBER OF MOTORS IN SECTION CAPACITY (LBS PER FOOT) 2’-0” 1 37 2’-6” 30 3’-0” 25 3’-6” 21 4’-0” 19 4’-6” 2 33 5’-0” 30 5’-6” 27 6’-0” 25 6’-6” 23 7’-0” 21 7’-6” 20 8’-0” 19 8’-6” 3 26 9’-0” 25 9’-6” 23 10’-0” 22 NOTE : Capacity is based on the use of standard Hytrol o-rings. Other o-rings are available that may increase load capacity, but reduce the number of motors that may be powered from one power supply. Contact factory for more information. FLOOR SUPPORTS –Now supplied as optional equipment. • OPTIONAL EQUIPMENT FLOOR SUPPORTS –MS Type floor supports are available with a wide range of adjustment. Specify top of belt or roller elevation. One support required at every bed joint and ends of conveyor. Holes in feet for lagging to floor. Knee braces recommended above MS-6 support. POWER SUPPLY (MOTORS) —20 Amp power supply available. 20 motors maximum. 5 AMP power supply available. 3 motors maximum. 480 Volt Power Supplies also available. POLY-TIER SUPPORTS —36 in. to 120 in. support heights in 6 in. increments. Knee braces required. CEILING HANGERS —5/8 in. dia. x 8 ft. long unplated steel rods fully threaded. Other lengths and galvanized rods available. GUARD RAILS –Adjustable Universal Channel Guard Rail, type A & B angle. (See Accessory section.) NOTE : If product comes in contact with guard rails, product flow will be affected. MOTOR AND SEPARATE CONTROL CARD – Available with 3 Amp setting. TANGENTS - Slaved and Powered type available. Motors mounted on outside of channel. • STANDARD SPECIFICATIONS

RkJQdWJsaXNoZXIy NjQ0OTEy