Hytrol Catalog

CATALOG | 08312018 CATALOG | 08312018 190-ACZ Horizontal Power Conveyor (Accumulating Type) The Model ACZ accumulates cartons, boxes, etc. Basic design eliminates complicated adjustments and allows a minimum of 2% Back Pressure. • 12 BedWidths • 2% Minimum Back Pressure • Finger Tip Snub Roller Adjustment, Both Sides • Reversible • Center Drive • Adjustable MS-Type Floor Supports Available Conveyor shown with optional floor supports 17-1/2" END GUARD TOTALLY ENCLOSED BELT GUARD 2-1/2" DIA. SNUB IDLER 21" 62" 38-1/4" SCREW TAKE-UP 13-1/2" 1.9" DIA. POP-OUT TREAD ROLLER 2-1/8" DIA. SNUB IDLER 6" DIA. TAKE-UP PULLEY 8" DIA. DRIVE PULLEY "X" 1.9" DIA. PRESSURE ROLLER 4" DIA. TAIL PULLEY END GUARD 2" 2" OPTIONAL MS SUPPORT SHOWN ALLOW 16" 10-3/4" "X" OVERALL LENGTH "A" PREFERRED FLOW Allow 65” with V-Belt Drive OVERALL FRAME WIDTH BETWEEN RAIL WIDTH 1-1/2" 3-1/8" 6-1/2" 1/4" TOTALLY ENCLOSED CHAIN GUARD 2-1/8" DIA. SNUB IDLER OR 1.9" DIA. RETURN IDLER KNURLED NUT SUSPENSION ANGLE DRIVE BELT 1.9" DIA. POP-OUT TREAD ROLLER SECTION “X-X” SIZE TO ORDER Overall Length "A" Between Rail Width 13" 15" 17" 19" 21" 23" 25" 27" 31" 33" 37" 39" Drive Belt Width 6" 8" Overall Frame Width 16" 18" 20" 22" 24" 26" 28" 30" 34" 36" 40" 42" 10’ WEIGHTS (Lbs.) Weights Based on 3" Roller Centers 385 416 448 479 509 551 581 612 679 720 771 803 15’ 521 552 596 637 679 733 774 816 908 950 1033 1077 20’ 657 688 744 797 849 915 967 1020 1137 1190 1295 1351 25’ 793 824 898 956 1019 1097 1160 1224 1366 1430 1557 1625 30’ 929 960 1040 1115 1189 1279 1353 1428 1595 1670 1819 1899 35’ 1065 1096 1188 1274 1359 1461 1546 1632 1824 1910 2081 2173 40’ 1201 1232 1336 1433 1529 1643 1739 1836 2053 2150 2343 2447 45’ 1337 1368 1484 1592 1699 1825 1932 2040 2282 2390 2605 2721 50’ 1473 1504 1632 1751 1869 2007 2125 2244 2511 2630 2867 2995 55’ 1609 1640 1780 1910 2039 2189 2318 2448 2740 2870 3129 3269 60’ 1745 1776 1928 2069 2209 2371 2511 2652 2969 3010 3391 3543 65’ 1886 1912 2076 2228 2379 2553 2704 2856 3198 3350 3653 3817 70’ 2017 2048 2224 2387 2549 2735 2897 3060 3427 3590 3915 4091 75’ 2153 2184 2372 2546 2719 2917 3090 3264 3656 3830 4177 4365 80’ 2289 2320 2520 2705 2889 3099 3283 3468 3885 4070 4439 4639 85’ 2425 2456 2668 2864 3059 3281 3476 3672 4114 4310 4701 4913 90’ 2561 2592 2816 3023 3229 3463 3669 3876 4343 4550 4963 5187 95’ 2697 2728 2964 3182 3399 3645 3862 4080 4572 4790 5225 5461 100’ 2833 2864 3112 3341 3569 3827 4055 4284 4801 5030 5487 5735 All weights in catalog are conveyor weights only. Accessories, crating, etc., are not included. 190-ACZ BELT –Ultimate 140 BBS–Nitrile. BED –Roller bed with 1.9 in. dia. roller x 16 ga. galvanized tube spaced every 3 in. and 1.9 in. dia. pressure roller x 16 ga. galvanized tube spaced every 6 in. Mounted in 6 1/2 in. x 12 ga. powder painted formed steel channel frame bolted together with butt couplings. CROSS BRACING –Rods with turnbuckles are fastened to underside of bed to provide proper alignment of bed rollers and insure tracking. (1) supplied in first 50' of bed section lengths and (1) per 50' of bed section length thereafter. Supplied in approximate center of lengths. CENTER DRIVE –Can be placed in any section of conveyor length. DRIVE PULLEY –8 in. dia. with 1 7/16 in. dia. shaft at bearings, fully lagged. TAIL PULLEY –4 in. dia. with 1 in. dia. shaft at bearings,machine crowned. SNUB IDLER –Adjustable 2 1/8 in dia. pre-lubricated ball bearings. RETURN IDLER –Adjustable 1.9 in dia. pre-lubricated ball bearings. TAKE-UP –Take-ups in center drive. Provides 16 in. of belt take-up. BEARINGS –Sealed, pre-lubricated, self-aligning, ball bearings on drive, tail, and take-up pulleys. Pre-lubricated ball bearings in tread and pressure rollers. SPEED REDUCTION –Sealed worm C-Face gear reducer. No. 50 roller chain to drive sheave. MOTOR –1/2 HP–208/230/460/575V–3 PH. 60 Hz. Totally Enclosed C-Face. CONVEYING SPEED –Constant 65 FPM. CAPACITY –Maximum load per linear foot of conveyor 150 lbs. NOT TO EXCEED capacity in chart. FLOOR SUPPORTS –Now supplied as optional equipment. • OPTIONAL EQUIPMENT FLOOR SUPPORTS –MS Type floor supports are available with a wide range of adjustment. Specify top of belt or roller elevation. One support required at every bed joint and ends of conveyor. Holes in feet for lagging to floor. Knee braces recommended above MS-6 support. CONVEYING SPEED –Other constant and variable speeds from 20 to 90 FPM. V-belt drive supplied under 46 FPM (2 HP) and with variable speeds. NOTE : Capacity and accumulation feature affected with speed change. SIDE MOUNTED LOW ELEVATION CENTER DRIVE –Motor reducer unit mounted to side of conveyor. Minimum low elevation16 in. SIDE MOUNTED END DRIVE –Minimum elevation 12 1/4 in. (underside take-up required). V-BELT DRIVE –V-belt supplied between motor and reducer. Allow 65 in. O-RING DRIVE CHAIN –With sealed in lubricant (Recommended for applications that do not permit regular lubrication). PACKAGE STOPS –Roller or pin type stops available, contact factory. GUARD RAILS –Adjustable Universal Channel Guard Rail, fixed channel, type A angle elevated to allow for pop-out tread rollers. Type B angle not available. (See Accessory section.) NOTE : If product comes in contact with guard rails, product flow will be affected. Fixed channel overlapping, one direction. Fixed channel non-overlapping, reversing. ROLLER CENTERS –Tread rollers spaced every 4 in., 6 in., or 8 in. (4 in. or 8 in. centers NOT AVAILABLE in 7 ft. 6 in. bed). POLY-TIER SUPPORTS –36 in. to 120 in. support heights in 6 in. increments. Knee braces supplied. CEILING HANGERS –5/8 in. dia. x 8 ft. long unplated rods fully threaded. Other lengths and galvanized rods available. MOTORS –Energy efficient, single phase, brakemotor, other characteristics. 2 HP maximum. ELECTRICAL CONTROLS –Non-reversing or reversible magnetic starters and push–button stations. AC variable frequency drive. LOAD CAPACITY CHART @ 65 FPM HP OVERALL FRAMEWIDTH 16" TO 22" OVERALL FRAMEWIDTH 24" TO 30" OVERALL FRAMEWIDTH 34" TO 42" TOTAL LOAD (LBS.) TOTAL LOAD (LBS.) TOTAL LOAD (LBS.) UP TO 50' UP TO 100' UP TO 50' UP TO 100' UP TO 50' UP TO 100' 1/2 1100 200 600 – – – 1 3300 2400 2800 1600 2200 – 2 7000 6000 6400 5200 5800 3300 • STANDARD SPECIFICATIONS

RkJQdWJsaXNoZXIy NjQ0OTEy