Hytrol Catalog

CATALOG | 08312018 199-PVR BED –Roller bed with 1.9 in. x 9 ga. wall unplated tread rollers spaced every 3 in, 4 in, or 6 in mounted in 7 ga. powder painted formed steel channel frame bolted together with butt couplings. SHAFT MOUNTED DRIVE –Shaft mounted gearmotor to the side of the bed section. POLY-V BELT –4-rib J-Profile roller to roller GUARD –Mounted to top of channel frame to totally enclose drive belts. BEARINGS –Sealed, pre-lubricated ball bearings on drive roller shaft. MOTOR –1/2 HP–208/230/460/575V–3 Ph. 60 Hz. Gearmotor. CONVEYING SPEED –Constant 35 FPM. CAPACITY –Maximum load per linear foot of conveyor 150 lbs with supports on 10’centers, 250 lbs with supports on 5’centers. 600 lbs total load. FLOOR SUPPORTS –Now supplied as optional equipment. CONVEYOR LENGTH –Maximum 10’per drive. • OPTIONAL EQUIPMENT FLOOR SUPPORTS –MSN Type floor supports are available with a wide range of adjustment. Specify top of belt or roller elevation. One support required at every bed joint and ends of conveyor. Holes in feet for lagging to floor. Knee braces recommended above MSN-6 support. CONVEYING SPEED –Other constant and variable speeds. NOTE : Capacity affected with speed change. GUARD RAILS –Adjustable Universal Channel Guard Rail, (both sides) fixed channel (both sides) or angle (one side). See Accessory section . POLY-TIER SUPPORTS –36 in. to 120 in. support heights in 6 in. increments. Knee braces supplied. CEILING HANGERS –5/8 in. dia. x 8 ft. long unplated rods fully threaded. Other lengths and galvanized rods available. MOTORS –Other HP gearmotors available. ELECTRICAL CONTROLS –Non-reversing magnetic starters and push-button stations. AC variable frequency drive. TRANSFERS –Chain transfers available. See accessories. GUARD REMOVED TO ILLUSTRATE ROLL TO ROLL DRIVE BELT. WARNING: DO NOT OPERATE CONVEYOR WITH GUARD REMOVED. • STANDARD SPECIFICATIONS