Hytrol Catalog

CATALOG | 08312018 36-CRRH BED –Roller bed with 3 1/2 in. x .300 in. wall unplated tread rollers with 1 1/16 in. hex shaft spaced every 6 in. or 12 in. Mounted in 5 ft. long powder painted structural steel channel frame bolted together with butt couplings. CENTER DRIVE –Top side mounted drive, mounted to 5 ft. long section near center of conveyor. Chain guard located on left hand side. DRIVE CHAIN –No. 60 roller chain. CHAIN GUARD –Formed steel upper & lower chain guard mounted to top and bottom of channel frame to totally enclose drive chains. BEARINGS –Sealed, pre-lubricated ball bearings. SPEED REDUCTION –Heavy-duty sealed worm gear C-Face speed reducer. No. 80 roller chain to drive shaft. MOTOR –2 HP–230/460V–3 Ph. 60 Hz. Energy Efficient C-Face motor and AC Variable Speed controller with softstart capability. CONVEYING SPEED –Variable 3-30 FPM. CAPACITY –Maximum load per linear foot of conveyor 2000 lbs. with supports on 5 ft. centers. NOT TO EXCEED CAPACITY IN CHART. FLOOR SUPPORTS –Now supplied as optional equipment. • OPTIONAL EQUIPMENT FLOOR SUPPORTS –HSF Type floor supports are available with a wide range of adjustment. Specify top of belt or roller elevation. One support required at every bed joint and ends of conveyor. Holes in feet for lagging to floor. Knee braces recommended above HSF-6 support. CONVEYING SPEED –Other constant and variable speeds. NOTE : Capacity affected with speed change. Contact factory. MOTORS –3 HP maximum. ELECTRICAL CONTROLS –Push-button stations. • STANDARD SPECIFICATIONS LOAD CAPACITY CHART @ 30 FPM HP OVERALL FRAMEWIDTH OVERALL FRAMEWIDTH OVERALL FRAMEWIDTH 26 27/32" to 30 27/32" 34 27/32" to 42 27/32" 48 27/32" to 62 27/32" TOTAL LOAD (Lbs.) TOTAL LOAD (Lbs.) TOTAL LOAD (Lbs.) UP TO 30' UP TO 60' UP TO 90' UP TO 30' UP TO 60' UP TO 90' UP TO 30' UP TO 60' UP TO 90' 2 21000 19200 17400 20400 18000 15600 19400 16000 12500 3 27000 25200 23400 26400 24000 21600 25400 22000 18500 Note : Capacities based on Hytrol supplied chain.

RkJQdWJsaXNoZXIy NjQ0OTEy